Need a 32mm 12 point 1/2" deep socket ASAP

[Squishy]

Hey, looking to borrow a 32mm 12 point 1/2" deep socket tonight, I've called literally almost all the parts stores and it seems none of them have it in deep socket, which I need. Using it to remove an axle, I'm located in Mckenzie so if you're near by and could lend me one I'd greatly appreciate it.


TIA

[Lucky97]

axle

[ianmcc]

Just checked (I am in Copperfield) and all I have is a 1¼" (31.75mm) deep 6 point.

Did you check Princess Auto?
http://www.princessauto.com/pal/prod...Shallow-Socket

[Squishy]

I called them and they said theyve only got up to 27mm in deep socket

Might stop by in person tomorrow

[Sentry]

Have you tried shallow? The shallow sockets in that size are still a good like inch and a half deep.

Also see if they've got it in 3/4" drive, then just use an adapter.

My axle socket collection is wonky, I've got a deep 30, a shallow 32, and a shallow 39. Never needed a deep 32.

[Squishy]

Yeah I initially went and bought a regular 32mm socket and it's not long enough.

[Zorac]

try napa. i needed a 30mm deep socket for a transmission flange and they had one. was less than $10 bucks too. they had a pretty big selection.

although it was only a 6 point. the wall on the 12 points were too thick for my application, but maybe they have 12 as well, i didnt really look.

[Rat Fink]

.

[Zero102]

I bought the princess auto axle nut socket set a while ago. It has a 32mm socket in it that is pretty deep (maybe 2" deep) but it is only 6 point... Does it need to be 12 point?

It is this kit:
http://www.princessauto.com/pal/prod...Nut-Socket-Set

I'm way the hell up in Royal Oak so that might be an obstacle, but I am headed downtown at around 6am tomorrow and after 8 I will be at various places around the city.

[btimbit]

Think I might have one actually, I'll double check

[vadeit]

I have a 32 mm deep socket 1/2" driver, is only 6 point though.

I am in Mackenzie Towne.

[Squishy]

It *must* be 12 point. It's on my celica. My whole damn build could have been finished last night, but noooo, Toyota strikes again with being a pain in the ass to work on.

I couldn't try napa yesterday because they were already closed. I'll try today.

If anyone has a 30mm 12 point maybe we can try that too but I'm pretty sure it's 32mm.

[master hec0]

Craftsman in the USA has a 12pt. Try using the product number and giving sears a call and see if they also carry the same socket. They should.

http://www.craftsman.com/craftsman-3...1&blockType=L1

or

try calling Gregg Distributes

and

worst case scenario get one from Ebay.

http://www.ebay.com/itm/32MM-METRIC-...356fea&vxp=mtr

[Zorac]

how deep does it need to be? i have a set of 3/4 drive 12 points that although aren't deep sockets, are a bit deeper than 1/2 inch drive. i have a 3/4 to 1/2 drive adapter as well.

the wall is fairly thick though, so you can use them anywhere there is a really tight fit.

if its 30mm, vw has a similar arrangement:

http://store.concept1.ca/store/produ...30mm-12-Point/

they even have Saturday hours.