Quantcast
Local Shop to fab up a light bar holder - Beyond.ca - Car Forums
Results 1 to 12 of 12

Thread: Local Shop to fab up a light bar holder

  1. #1
    Join Date
    Jul 2004
    Location
    Calgary
    My Ride
    2010 frontier pro-4x
    Posts
    565
    Rep Power
    20

    Default Local Shop to fab up a light bar holder

    Hey guys, recently purchased a 20" LED bar and looking at a few mounting options. Because I will eventually be going with an aftermarket bumper I want to have it mounted on the roof.

    My fronty has the factory roof rack but the cross member aren't strong enough to support that much weight. So basically im looking for a cross member that can be fabbed up that I can just drill into myself.

    Similar to the light rack posted below except it will be a flat (instead of circular tubing) that I can drill into. Anyone have any recommendations? I was thinking about stopping in at YotaFab.


  2. #2
    Join Date
    Apr 2009
    Location
    Unemployment Line
    My Ride
    Sierra, RDX
    Posts
    2,672
    Rep Power
    20

    Default

    Check out Poison Spider, Northridge carries their stuff and it will be cheaper in the long run to buy rather than fab.
    See Crank. See Crank Walk. Walk Crank Walk.

  3. #3
    Join Date
    May 2002
    Location
    Calgary
    My Ride
    6.7 CUMMINS, E50 AMG
    Posts
    4,820
    Rep Power
    27

    Default

    I could fab that up for ya
    Machining, Fabricating, Welding etc.

  4. #4
    Join Date
    Jul 2004
    Location
    Calgary
    My Ride
    2010 frontier pro-4x
    Posts
    565
    Rep Power
    20

    Default

    Originally posted by FraserB
    Check out Poison Spider, Northridge carries their stuff and it will be cheaper in the long run to buy rather than fab.
    I doubt I could get it to work though because it wouldn't line up with the existing holes of the roof rack mount.

  5. #5
    Join Date
    Jul 2003
    Location
    Screamin' Paintworks
    My Ride
    QX80,SL600, Utopia 205SE
    Posts
    964
    Rep Power
    21

    Default





    Would something like this work?

  6. #6
    Join Date
    Apr 2009
    Location
    Unemployment Line
    My Ride
    Sierra, RDX
    Posts
    2,672
    Rep Power
    20

    Default

    Where are those from? I'll need them to mount to the truck in a month or so.
    See Crank. See Crank Walk. Walk Crank Walk.

  7. #7
    Join Date
    Jul 2003
    Location
    Screamin' Paintworks
    My Ride
    QX80,SL600, Utopia 205SE
    Posts
    964
    Rep Power
    21

    Default

    http://www.labrak.com/

    My LX is getting some work done there. I will be picking it up in a couple weeks.

    Among the things they are installing is a 40" LED light bar using those mounts.


    If you are interested I could bring a set back for you.

  8. #8
    Join Date
    Dec 2012
    Location
    a
    My Ride
    car
    Posts
    56
    Rep Power
    0

    Default

    Sorry to highjack, but could someone recommend a good place in Edmonton or Calgary that carries these LED light bars?

  9. #9
    Join Date
    Apr 2009
    Location
    Unemployment Line
    My Ride
    Sierra, RDX
    Posts
    2,672
    Rep Power
    20

    Default

    Modern Motors in Calgary

    Beartrax4x4 Outfitters in Edmonton

    Northridge4x4.ca in Ponoka, free shipping
    See Crank. See Crank Walk. Walk Crank Walk.

  10. #10
    Join Date
    Jul 2003
    Location
    Screamin' Paintworks
    My Ride
    QX80,SL600, Utopia 205SE
    Posts
    964
    Rep Power
    21

  11. #11
    Join Date
    Feb 2008
    Location
    Calgary
    Posts
    623
    Rep Power
    17

    Default

    We can help you out with Rigid LED bars as well! Still gathering pictures of customer installs, we can demo Rigid Dually D2's here in the showroom as well if you haven't seen them in person.

    Shoot us an email if we can help! [email protected]

    Here's some Dually D2 shots, Beige Jeep JK is using Poison Spyder A-pillar mounts.




  12. #12
    Join Date
    Apr 2009
    Location
    Nowhere
    Posts
    6,852
    Rep Power
    26

    Default

    ...
    Last edited by Sugarphreak; 07-12-2019 at 11:21 AM.

Similar Threads

  1. map sensors... 3.5.bar? 4 bar? 5 bar?

    By Toma in forum Forced Induction Talk
    Replies: 9
    Latest Threads: 11-21-2005, 01:12 AM
  2. What local or nearly local machine shop can..

    By ancient in forum Mechanical
    Replies: 11
    Latest Threads: 02-11-2005, 11:56 AM
  3. FS: 4 month old JL 12w6v2 in a pre fab box

    By Clem in forum Automotive Parts [Audio/Video/Radar Systems]
    Replies: 6
    Latest Threads: 04-29-2004, 06:11 PM
  4. FAB design or Lorinser

    By benzo in forum Cosmetic and Styling Modifications
    Replies: 27
    Latest Threads: 01-31-2004, 11:38 PM
  5. Replies: 2
    Latest Threads: 09-16-2003, 11:18 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •