Vaporizers

[GQBalla]

Pure VG = clouds

definitely an acquired taste though. To me it taste like "Heavy" i can't even explain it.

i find it gross

[DENZILDON]

I thin it out with distilled water. I could put in PG but only if I'm breaking down flavor oils.

[ercchry]

i almost always go 50/50... vg=clouds, and phlegm pg=flavor, and dry throat. i find even parts is best

[GQBalla]

50/50 for me as well. I tried 60 vg and 40 vg, didn't like it

[BensonTT]

for you guys that sub ohm.. Is there any diff from lets say a .5 ohm to a .7 or .8 ohm?

[nammer69]

Originally posted by BensonTT
for you guys that sub ohm.. Is there any diff from lets say a .5 ohm to a .7 or .8 ohm?

Lower the ohm the more vapor and flavor you get from the rda or rta. You really don't need a super low ohm to get crazy cloud, as long you have enough airflow and built your coils right you can get alot of clouds even at .8 ohms

[ercchry]

Originally posted by nammer69


Lower the ohm the more vapor and flavor you get from the rda or rta. You really don't need a super low ohm to get crazy cloud, as long you have enough airflow and built your coils right you can get alot of clouds even at .8 ohms

clouds and flavor are inverse things

but yeah, i dont see a huge difference below ~0.75ohms.... besides HEAT, those fuckers get hot around 0.3ohms

[BensonTT]

Thanks guys

[OCDP]

Not sure if anyone's interested here but I've got a custom DNA30 box mod for sale. Built like a tank, 30 watts of power, holds a single 18650 battery. Asking $120 OBO.

[BensonTT]

Originally posted by OCDP
Not sure if anyone's interested here but I've got a custom DNA30 box mod for sale. Built like a tank, 30 watts of power, holds a single 18650 battery. Asking $120 OBO.

Doesnt Fasttech sell these for like 50bux?

[OCDP]

This is custom made with authentic Evolv DNA30 chip. Canadian made.

[GQBalla]

i sub ohm i like hot vapes though.

Depends on your set up.

for example on my Hana DNA 30 clone i got from fasttech i have to build them to about .5 ish ohm in order for the thing to work correctly.

For my magma im using a dual coils at .39 ohm on my ohm meter. If you want dense clouds, you will want to sub ohm. If you just want clouds sub ohm a little bit and just have massive airflow.

[hurrdurr]

I'm looking for a box mod that can hold 2 18650 and fire up to 50W. PM if you guys have anything.

Thanks!

[DENZILDON]

Anyone done a DIY pass through?

[OCDP]

I'll take $80 for the box mod if anyone's interested.

[GQBalla]

Originally posted by DENZILDON
Anyone done a DIY pass through?

a usb pass through?

https://www.fasttech.com/products/0/...-battery-for-e

[DENZILDON]

Yup, pretty much. But I wanted to know if anyone did a DIY. I got tons of usb and old power supply stuff that I can play around.

[AndyL]

Leatned a valuable lesson today.

Don't cheap out on mech mods...

Put a stingray to work today - instead of my usual stainless knockoffs...

I think I'll be doing some rebuilds tonight... .68 ohms was pretty good in the old mod with the aqua and fogger - I think I'll shoot for .8-1ohm on the next build...

So much more flavor from a good mod...

Anyone looking for some mech mods? I'll be parting with a few shortly

[EvolutionVape]

Originally posted by AndyL
Leatned a valuable lesson today.

Don't cheap out on mech mods...

Put a stingray to work today - instead of my usual stainless knockoffs...

I think I'll be doing some rebuilds tonight... .68 ohms was pretty good in the old mod with the aqua and fogger - I think I'll shoot for .8-1ohm on the next build...

So much more flavor from a good mod...

Anyone looking for some mech mods? I'll be parting with a few shortly

It's amazing how much more you can get out of a quality tube. I've used some cheaper chinese knock off of knock offs (Yes, there is clones of clones) and not only do they give you major inconsistencies, the one I used would give me a heated electrical shock when sub ohming it.

[AndyL]

Yeah ⅛" of copper tube lining makes a difference

Dumb question of the day - shisheido cotton - in my aqua and fogger 4.1 - keep having dry hit issues if I approach chainvape levels... I'm cutting diagonal and feeding the taper down through the wick channels much like with cotton ball wicks - anyone have a solution?

No taper and just like with cotton - dry hits galore.

Just running the straight through method - Chanel coil channel - not channel coil around the posts channel.