An e-cig starter is comprised of a few parts; a battery, a coil, tank and tip.
One of our starter kits is the EVOD kit.
» Click image for larger version
This specific kit, comes with 2 complete units.
» Click image for larger version
The unboxing shows a usb charger, wall plug and a pack of replacement coils.
Here I also opened the tank to reveal the coil attached to the base of the tank
» Click image for larger version
To fill the tank, you drip your e-juice down the inside of the tank till you come up close to the top of the center chimney
To replace the coil; just simply unscrew and screw in another.
» Click image for larger version
To operate the unit is a quick 5 clicks of the button. The light ring around the button will flash signaling that it has turned on.
To use; depress the button and take a puff. Be sure to keep the button pressed while you inhale.
To turn off, simply click the button 5 times again and the light will flash again.
Many of these units and similar ones also have a safety feature that will not allow you to press the fire button for more than 10 seconds.
They also have a feature that they will not operate with a coil that is too low for resistance - commonly known as 'sub-ohming'
Sub-ohming is used in Cloud Competitions - who can create the biggest vapor cloud under certain build guidelines.
The EVOD 2pc kit is $55.
There are other kits available:
EVOD Blister pack - $29
Itaste Starter - $35
EMOW Starter - $65
EMOW Mega Kit - $85
After this we go into an Advanced Starter with a Mechanical Mod and also with Regulated Mods.
Those I will explain in a different thread.
Any questions?