Quantcast
Some noises coming from my Integra - Beyond.ca - Car Forums
Results 1 to 16 of 16

Thread: Some noises coming from my Integra

  1. #1
    Join Date
    May 2002
    Location
    Calgary, AB
    My Ride
    '05 Legacy GT
    Posts
    41
    Rep Power
    0

    Default Some noises coming from my Integra

    Hi all, I have a 1996 integra, and I have a few questions about some noises coming from my car.

    1) When I push in the clutch, it squeeks. Perhaps something to do with clutch fluid?

    2) There's a rattling noise coming from underneath my car in the exhaust system. The sound is resonating from somewhere near front axels(it's not coming form the axels, it's just coming from around that area). I only hear it at low rpm's...like when you are just increasing revs a bit to engage the clutch. At Normal idle and/or driving, the rattling isn't present. It's almost like something is loose. I talked to one friend, and he said he had an integra that did the same thing. When he got aftermarket hearders, the problem went away.

    If anyone has any suggestions, I'd appreciate it, thanks!

  2. #2
    Join Date
    May 2002
    Location
    Iceland
    Posts
    226
    Rep Power
    0

    Default

    Welcome aboard!

    Go buy the WRX you wanted and it'll fix all your problems

  3. #3
    Join Date
    May 2002
    Location
    Calgary, AB
    My Ride
    '05 Legacy GT
    Posts
    41
    Rep Power
    0

    Default

    Originally posted by spyderman
    Welcome aboard!

    Go buy the WRX you wanted and it'll fix all your problems
    haha...I just might. I'm stilling running on winters...so I still might justify the WRX because it'll be cheaper in the long run if I buy a whole new car now, than to buy summer tires AND a new car down the road.hehe

  4. #4
    Join Date
    May 2002
    Location
    calgary
    Posts
    322
    Rep Power
    22

    Default

    time for a new clutch and a header will solve the problem, that rattling noise is coming from the factory downpipe witch is well known to make that noise at around 3000-3300 rpms.
    I'd go with superman and trade it in for the WRX you wanted

  5. #5
    Join Date
    May 2002
    Location
    Calgary
    My Ride
    Skateboard
    Posts
    928
    Rep Power
    22

    Default Re: Some noises coming from my Integra

    Originally posted by ThreePly
    Hi all, I have a 1996 integra, and I have a few questions about some noises coming from my car.

    1) When I push in the clutch, it squeeks. Perhaps something to do with clutch fluid?

    2) There's a rattling noise coming from underneath my car in the exhaust system. The sound is resonating from somewhere near front axels(it's not coming form the axels, it's just coming from around that area). I only hear it at low rpm's...like when you are just increasing revs a bit to engage the clutch. At Normal idle and/or driving, the rattling isn't present. It's almost like something is loose. I talked to one friend, and he said he had an integra that did the same thing. When he got aftermarket hearders, the problem went away.

    If anyone has any suggestions, I'd appreciate it, thanks!
    The rattleling could be the heat sheild Honda puts around the exhaust. I had a CRX that rattle like a tin can at idle until I took it out. I don't really see the benefit of the heat sheild most other cars don't have them.

    Funny how I have the opposite clutch problem. My Prelude makes a little squeek sound when I engage the clutch. It happens every so often. I don't think I need to replace the clutch since the car only has 63K on it. I booked a service appointment for Friday at T and T.

  6. #6
    Join Date
    May 2002
    Location
    a van down by the river
    My Ride
    Bmw and ford
    Posts
    2,252
    Rep Power
    27

    Default

    The noise from the clutch is most likely the release bearing and should be replaced.

    As already noted the rattle might be the heat shield or if the car is a GSR then it might be the dreaded b-pipe rattle. If the car is a GSR then a new header is needed

  7. #7
    Join Date
    May 2002
    Location
    Calgary, AB
    My Ride
    '05 Legacy GT
    Posts
    41
    Rep Power
    0

    Default

    Cool, thanks guys. At least I'll have some info when I take my car in...incase someone tries to screw me around and say I need to replace this and that and god knows what else. Thanks for the info!

  8. #8
    Join Date
    Jun 2002
    Location
    Calgary
    My Ride
    335i
    Posts
    8,929
    Rep Power
    30

    Default

    I have had the same problem with my integra. The problem stems from the connection between the exhaust manifold and the catalytic converter. The problem is, my problems happened AFTER i got my header put in.
    Original Post NAZI Moderated


    Originally posted by r3cc0s
    Felon or Mistermeiner

  9. #9
    Join Date
    May 2002
    Location
    NW
    My Ride
    ACR/EG/FJZ80/DC4/DC2/22RE
    Posts
    2,025
    Rep Power
    24

    Default

    Heat shield is your friend . You wouldn't want a small fire underneath.

    The release bearing would also be my guess for the clutch.

  10. #10
    Join Date
    May 2002
    Location
    Calgary, AB
    My Ride
    '05 Legacy GT
    Posts
    41
    Rep Power
    0

    Default

    Originally posted by Weapon_R
    I have had the same problem with my integra. The problem stems from the connection between the exhaust manifold and the catalytic converter. The problem is, my problems happened AFTER i got my header put in.
    Shitty deal for you. Seems like a lot integra's have this problem though. At least it's not a mechanical problem, it's just kinda annoying. After I get my car checked out, I'll make a post to let everyone know how it went, and hopefully how it was solved.

  11. #11
    Join Date
    Jun 2002
    Location
    Calgary
    My Ride
    335i
    Posts
    8,929
    Rep Power
    30

    Default

    Originally posted by ThreePly


    Shitty deal for you. Seems like a lot integra's have this problem though. At least it's not a mechanical problem, it's just kinda annoying. After I get my car checked out, I'll make a post to let everyone know how it went, and hopefully how it was solved.
    Ya its nothing major, but it sounds annoying and it makes the car sound cheap - let me know how u fixed the problem so I can know what to expect...i've actually had a mechanic tell me that it was something inside my engine, and i'd need a new timing belt to stop that sound...can u believe that one? I'm not a mechanic, but i'm not an idiot...I know what sounds are coming from where, and a general idea of how to fix each thing.

  12. #12
    Join Date
    May 2002
    Location
    Calgary
    My Ride
    6.7 CUMMINS, E50 AMG
    Posts
    4,820
    Rep Power
    27

    Default

    My clutch squeeks a bit when I disengage it, its the fork on the slave cylinder.
    Machining, Fabricating, Welding etc.

  13. #13
    Join Date
    May 2002
    Location
    The depths of despair!
    My Ride
    Anything topless.
    Posts
    3,073
    Rep Power
    25

    Default

    Originally posted by ThreePly
    Cool, thanks guys. At least I'll have some info when I take my car in...incase someone tries to screw me around and say I need to replace this and that and god knows what else. Thanks for the info!
    And u know how they always try to bend u over down there at silver hill!!! haha, it wouldn't be the first time... as a matter of fact, ur pretty much their bitch!!!:p Anyway, I know what the problem is! Everyone that has posted is dead wrong!!! U really wanna know what it is? It's the holes that u tried to cover up when u took off ur three piece and jacked ur car back up!!! haha
    sig deleted by moderator, click here for info

    WTF!! I am a moderator!!


  14. #14
    Join Date
    May 2002
    Location
    Calgary, AB
    My Ride
    '05 Legacy GT
    Posts
    41
    Rep Power
    0

    Default

    Originally posted by LUDELVR


    And u know how they always try to bend u over down there at silver hill!!! haha, it wouldn't be the first time... as a matter of fact, ur pretty much their bitch!!!:p Anyway, I know what the problem is! Everyone that has posted is dead wrong!!! U really wanna know what it is? It's the holes that u tried to cover up when u took off ur three piece and jacked ur car back up!!! haha
    I'm not going to Silverhill anymore...no way in hell. They were good up until that one time...they blew it. I don't need my 3 piece anymore....your mom gives it to me. Anyway, those holes from my spoiler are speed holes now. Soon, they'll be covered up profressionally. For now, it's just to keep the rain out. Spoiler will be up for sale real soon.

  15. #15
    Join Date
    May 2002
    Location
    713
    Posts
    7,380
    Rep Power
    33

    Default

    ThreePly, I think you should keep the three piece. Although Leo's mom does give it to the rest of us quite often too, I think the three piece looks the best on your car.

  16. #16
    Join Date
    May 2002
    Location
    Canada
    My Ride
    Cayenne TT
    Posts
    513
    Rep Power
    22

    Default

    The clutch noise is probably a rusty release bearing...

    and the rattling noise is probably just a heatsheild...

Similar Threads

  1. wow they coming out w/ 350Z convertable

    By Stratus_Power in forum General Car/Bike Talk
    Replies: 12
    Latest Threads: 09-15-2002, 09:51 PM
  2. mitsubishi dealership coming to cowtown

    By choweyt3t4 in forum General Car/Bike Talk
    Replies: 28
    Latest Threads: 08-29-2002, 04:04 PM
  3. Integra for Sale

    By YBA in forum Miscellaneous Buy/Sell/Trade
    Replies: 6
    Latest Threads: 05-31-2002, 10:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •