Quantcast
The Lesbaru - Page 2 - Beyond.ca - Car Forums
Page 2 of 2 FirstFirst 1 2
Results 21 to 39 of 39

Thread: The Lesbaru

  1. #21
    Join Date
    Sep 2008
    Location
    Calgary
    My Ride
    E39 M5, 86 Mustang GT, 02 Impreza
    Posts
    2,991
    Rep Power
    16

    Default

    Nothing is final yet but that's still the plan. Not concerned at all. Oil comes out of turbos just fine, ever ran one with the drain hose off? I've built many many turbo cars both for myself and for work, on all sorts of random platforns.

  2. #22
    Join Date
    Jun 2005
    Location
    Calgary, Alberta
    My Ride
    '07 Subaru LGT wagon
    Posts
    205
    Rep Power
    0

    Default

    Quote Originally Posted by Sentry View Post
    This quote is hidden because you are ignoring this member. Show Quote
    Nothing is final yet but that's still the plan. Not concerned at all. Oil comes out of turbos just fine, ever ran one with the drain hose off? I've built many many turbo cars both for myself and for work, on all sorts of random platforns.
    No, I have never pulled the drain off to watch it come out. My previous car used roller rockers/cam followers and hydraulic lifters and was pretty sensitive to breakage of the rockers if things got too hot or too much oil volume in the head so I would never have considered plumbing it that way (although it wouldn't have worked without a scavenge pump anyways since it was a typical transverse 4 cylinder.) The goal with that engine was to reduce oil pressure and volume to the head. Are you planning on using some off the shelf EJ manifolds or custom?

  3. #23
    Join Date
    Sep 2008
    Location
    Calgary
    My Ride
    E39 M5, 86 Mustang GT, 02 Impreza
    Posts
    2,991
    Rep Power
    16

    Default

    Custom building myself using the N/A header as a starting point.

  4. #24
    Join Date
    Sep 2008
    Location
    Calgary
    My Ride
    E39 M5, 86 Mustang GT, 02 Impreza
    Posts
    2,991
    Rep Power
    16

    Default

    Knocked out all the exhaust fab today, decided the best spot for the turbo was in a traditional rotated location.

    Up-pipe and downpipe


    Turbo location and planned A2W IC location


    Entire exhaust with a nice quiet dynomax muffler


    Still lots to do, but this was the first big step. Nothing more motivating than hanging a turbo onto something.

  5. #25
    Join Date
    Sep 2008
    Location
    Calgary
    My Ride
    E39 M5, 86 Mustang GT, 02 Impreza
    Posts
    2,991
    Rep Power
    16

    Default

    Took off the up pipe and downpipe, wrapped them with some blue exhaust wrap I bought like 7yrs ago and never used. Sanded flanges flat and installed everything for good.

    Removed the valve cover and welded in a fitting for oil drain, then made my feed and drain hoses. Car now runs with the turbo on. Engine bay is kind of a mess right now, it'll be tidy when everything is done.





  6. #26
    Join Date
    Mar 2005
    Location
    Foothills County
    My Ride
    is faster than yours
    Posts
    959
    Rep Power
    15

    Default

    The blue wrap sets the whole engine bay off!

  7. #27
    Join Date
    Sep 2008
    Location
    Calgary
    My Ride
    E39 M5, 86 Mustang GT, 02 Impreza
    Posts
    2,991
    Rep Power
    16

    Default

    I think it's cheezy, I like the DEI titanium wrap the best. But I had this stuff lying around forever and needed to use it on something lol

    I'm excited to finish this thing up and have boost for winter.

  8. #28
    Join Date
    Sep 2008
    Location
    Calgary
    My Ride
    E39 M5, 86 Mustang GT, 02 Impreza
    Posts
    2,991
    Rep Power
    16

    Default

    Welded on a little elbow to the compressor housing to simplify piping


    And roughed in the charge pipe. Very simple and very short.



    Built a reservoir for the IC system


    And finalized the charge pipes, built a bracket for the IC, and built an intake tube to the fender.

  9. #29
    Join Date
    Sep 2008
    Location
    Calgary
    My Ride
    E39 M5, 86 Mustang GT, 02 Impreza
    Posts
    2,991
    Rep Power
    16

    Default

    Started wiring today, installed wideband and boost gauge, installed the microsquirt, changed firmware to MS2extra(more features than default microsquirt firmware) and wired a couple things to it. Has good sync on cam and crank sensors and wideband reads same as gauge.

    I would say I'm about half done wiring at this point and 90% done mechanical. Boost soon!



    EDIT: Scoped the crank and cam sensors tonight at the microsquirt just to verify they are clean strong signals. Yellow is crank, pink is cam. 6 teeth on the crank and 7 on the cam.
    click for larger version
    » Click image for larger version

    EDIT2: Finished wiring today, car is now fully running on the microsquirt. Took about 12hrs total to wire it and get it running. Not bad at all for a scratch install. Tuning out-of-boost is complete also. Just have to finish the heat exchanger and pump and plumbing for the intercooler, maybe also whip up a catchcan, then it's time to make some horsepower.
    Last edited by Sentry; 08-11-2019 at 06:30 PM.

  10. #30
    Join Date
    Sep 2008
    Location
    Calgary
    My Ride
    E39 M5, 86 Mustang GT, 02 Impreza
    Posts
    2,991
    Rep Power
    16

    Default

    Finished the intercooler setup, I've been hitting some boost here and there working on the tune, this thing is pretty fun.




    Here it is with the grille and headlight back in. See anything suspicious?


    Testing the pump with a booster pack before I wired it


    EDIT: Some test pulls today, clutch slips a tiny bit at 10psi, car feels great though. Probably 200whp at the moment. Gonna put a resonator in the exhaust so it sound less ass on decel and low rpm.

    Last edited by Sentry; 08-16-2019 at 11:14 AM.

  11. #31
    Join Date
    May 2008
    Location
    Calgary
    Posts
    1,184
    Rep Power
    13

    Default

    This thing has gone through quite the transformation in a short time.

  12. #32
    Join Date
    Sep 2008
    Location
    Calgary
    My Ride
    E39 M5, 86 Mustang GT, 02 Impreza
    Posts
    2,991
    Rep Power
    16

    Default

    I'm a little impressed myself lol, 1 day a week gets er done quick.

    Did my clutch today, just got a "heavy duty" 6 puck off rockauto. Ready for 2-3 more psi and dyno pulls.



  13. #33
    Join Date
    Jan 2008
    Location
    Cruising the +15
    My Ride
    100% SAVAGE
    Posts
    6,100
    Rep Power
    26

    Default

    I'm impressed with you as well.
    Double-meat sub dreams.
    Public Mobile referral code: 88M4Y9

  14. #34
    Join Date
    Sep 2008
    Location
    Calgary
    My Ride
    E39 M5, 86 Mustang GT, 02 Impreza
    Posts
    2,991
    Rep Power
    16

    Default

    Just tinkered a bit today, wired in an antilag switch in case I wanna be a ricer and blow fireballs. Polished the headlights and foglights and gave it an actual hand wash for once. Still swirled to fuck, but good enough for winter.

    Boost is up to 13psi, gonna stop there. Raced a buddy's stock 2013 STI and pulled 2 lengths on him from 5-140kph before I let off. Should be about 220whp, dyno very soon!



  15. #35
    Join Date
    Aug 2002
    Location
    Calgary
    My Ride
    CTS-V, Trackhawk
    Posts
    917
    Rep Power
    18

    Default

    Awesome! Even better that you can beat an STI!
    I like neat cars.

  16. #36
    Join Date
    Oct 2003
    Location
    YYC
    Posts
    1,575
    Rep Power
    17

    Default

    Damn man, you have skills! Impressive.
    Dear Sriracha Sauce, you're the only thing with a cock on it that I want in my mouth.

  17. #37
    Join Date
    Sep 2008
    Location
    Calgary
    My Ride
    E39 M5, 86 Mustang GT, 02 Impreza
    Posts
    2,991
    Rep Power
    16

    Default

    Threw it on the dyno today, it made 240whp 270ftlbs at 13psi. For reference, a stock STi makes 220whp and a full bolt-on + tune STi makes 260whp on this dyno. Very happy with these results.

    Quarter mile soon weather permitting.





  18. #38
    Join Date
    Jul 2002
    Location
    calgary, alberta, canada
    My Ride
    Lezbox
    Posts
    5,439
    Rep Power
    23

    Default

    I am enjoying this build, you going to be at the vex event Saturday?
    sig deleted by moderator, because they are useless

  19. #39
    Join Date
    Sep 2008
    Location
    Calgary
    My Ride
    E39 M5, 86 Mustang GT, 02 Impreza
    Posts
    2,991
    Rep Power
    16

    Default

    I might be, undecided at the moment what to do with my saturday.

Page 2 of 2 FirstFirst 1 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •