Spare bike parts thread

[taemo]

This quote is hidden because you are ignoring this member. Show Quote

I have a set of these that I bought for riding on Maui. They're great climbing wheels if you're a weirdo and like climbing (which is why I own a set).

I dont mind climbing but I don't look for them, unfortunately they are everywhere lol. I thought keeping these for climbing rides but I think I can get by with the c35 that I just received.

This quote is hidden because you are ignoring this member. Show Quote

Price on the C24's? @taemo

@bigboom I have them listed for 700$ but if a beyonder wants it they can have it for 600$

[Penguin_Racecar]

The c35s are a great all-round wheel too. I have the heavier (1700g vs 1550g) version of them (the RS81) and quite like 'em. Seem to hold their speed a little bit better than the C24, while the C24s feel like they accelerate a bit quicker. $600 is a good price.

[lint]

long shot, but does anyone have a spare left side crank arm 170mm? Picked up a used bike and it has 2 drive side cranks...

[Penguin_Racecar]

That would make things awkward to pedal. You'll need a picture of the bottom bracket axle/spindle as there are many different crank and bottom bracket types.

[ZeroGravity]

This quote is hidden because you are ignoring this member. Show Quote

long shot, but does anyone have a spare left side crank arm 170mm? Picked up a used bike and it has 2 drive side cranks...

type of crank you're looking for?

[lint]

This quote is hidden because you are ignoring this member. Show Quote

type of crank you're looking for?

square taper. just the one arm, the drive side is normal

[vengie]

Long shot here as well.

Does anyone have a Rockshox Monarch RC3 for an 2018 Enduro Comp?

Had to send mine out for rebuild... three week wait.

[taemo]

This quote is hidden because you are ignoring this member. Show Quote

square taper. just the one arm, the drive side is normal

bikeroot at the UofC has bins full of square taper crank arms, not sure the length but wouldn't be surprised if you find a 170mm there.

[lint]

This quote is hidden because you are ignoring this member. Show Quote

bikeroot at the UofC has bins full of square taper crank arms, not sure the length but wouldn't be surprised if you find a 170mm there.

Thanks. I may contact them. The website shows that they've been hit by the parts shortage too:

Current out of stock NEW items include:
•All Schrader valve tubes (except 20″ and 26″)
•6-10 speed chains [ETA: mid-June]
•8-10 speed cassettes
•Cranksets
•Bottom brackets in sizes other than cartridge style 127mm spindle
•8-11 speed rear derailleurs
•Most disc brake pads [too many different varieties to keep in stock]

[ZeroGravity]

This quote is hidden because you are ignoring this member. Show Quote

square taper. just the one arm, the drive side is normal

Is the FSA Vero Compact 50/34 crank a "square taper"?

I supposedly have the above set from a 2017 GT Grade 105 Alloy that I've swapped to the Shimano hollowtech... 170 mm.

https://99spokes.com/bikes/gt/2017/grade-105

PS... I also have the original spindle / bottom bracket that pairs up with the FSA crank set. Rode for about 3km before I got the shop to swap it out.

[CLiVE]

This quote is hidden because you are ignoring this member. Show Quote

square taper. just the one arm, the drive side is normal

JIS or ISO square taper? Have a few ISO sets laying around.

[lint]

This quote is hidden because you are ignoring this member. Show Quote

JIS or ISO square taper? Have a few ISO sets laying around.

I think it's JIS. It's an FSA Gossamer circa 2009.

- - - Updated - - -

This quote is hidden because you are ignoring this member. Show Quote

Is the FSA Vero Compact 50/34 crank a "square taper"?

I supposedly have the above set from a 2017 GT Grade 105 Alloy that I've swapped to the Shimano hollowtech... 170 mm.

https://99spokes.com/bikes/gt/2017/grade-105

PS... I also have the original spindle / bottom bracket that pairs up with the FSA crank set. Rode for about 3km before I got the shop to swap it out.

Thanks, but just looking for the non-drive side. Don't need to replace the whole thing. Looks like I might be able to find a cheap (enough) one on amazon

[CLiVE]

This quote is hidden because you are ignoring this member. Show Quote

I think it's JIS. It's an FSA Gossamer circa 2009.

- - - Updated - - -



Thanks, but just looking for the non-drive side. Don't need to replace the whole thing. Looks like I might be able to find a cheap (enough) one on amazon

Yes, would be JIS unfortunately. I have some full cranksets I could lend while you're waiting if you're in a pinch...but don't want to break them up.

[lint]

This quote is hidden because you are ignoring this member. Show Quote

Yes, would be JIS unfortunately. I have some full cranksets I could lend while you're waiting if you're in a pinch...but don't want to break them up.

yeah, that's why I know it's a long shot. Just going to order one on amazon.

[Kjonus]

Looking for a Shimano 3 speed bar mount shifter if anyone has one laying around.

[bigboom]

Anybody need some q rings? edit: sold

[bigboom]

How about some s works toupe saddles?
All 143 mm width. Great for light weight builds!


- - - Updated - - -

WTB saddles? A volt and a Kona branded silverado, brand new.

[bigboom]

How about stems?
3t 130mm 17degree
Thomson 110 0 degree
Zipp service course sl 100mm 6 degree
FSA slk 100mm 6 degree
Easton EA 70 6 degree
Thomson x4 50mm 0 degree.

[Penguin_Racecar]

Errrr how much for the black S-Works Toupe? I have one of the lower end ones and LOVE it. Also going to need to check my stem lengths to see if I should upgrade anything.

[taemo]

This quote is hidden because you are ignoring this member. Show Quote

How about stems?
3t 130mm 17degree
Thomson 110 0 degree
Zipp service course sl 100mm 6 degree
FSA slk 100mm 6 degree
Easton EA 70 6 degree
Thomson x4 50mm 0 degree.

can you hold the EA 70 for me?
not sure when I will be able to pick it up but I will need a 70mm stem