Few times for incidents, many times in a maintenance situation.This quote is hidden because you are ignoring this member. Show Quote
Few times for incidents, many times in a maintenance situation.This quote is hidden because you are ignoring this member. Show Quote
Let me guess: Bitfury?
Machining, Fabricating, Welding etc.
No. Custom design. Doesn't really matter though tbh. I've seen a lot of different designs and they all end up being the same in many ways.This quote is hidden because you are ignoring this member. Show Quote
Biggest variations in designs you'd see are what happens when it rains or snows or sand storms (or immersion / air cooled).
Last edited by themack89; 06-14-2021 at 08:11 AM.
On Sabbatical
These guys seem to have a plan: https://gam.ai/
This quote is hidden because you are ignoring this member. Show Quote
Yeah! There are many more as well, or at least it has become more palatable since BTC ran to the $30k+ range.This quote is hidden because you are ignoring this member. Show Quote
Looking for some help: the project manager for the turbine side is struggling to locate the following:
- (4) NACE Compliant Parker Style Filters
- (1) Coalescing Filter
- (1) Sweetening can for pop tank vapours
Companies that have already been contacted for the parker filters and coalescing filters:
- PCF Micron Filtration
- Propak
- CBVL Robotics
- JL Filtration
- CPS Filtration
- JCI Group
- Kirby Controls
- CEG CreamCo
Companies that have already been contacted for the sweetening can:
- AM-Gas
- Reef Oilfield
- International Oilfield Brokers
On Sabbatical
Did you contact the correct JCI? There's like 30 of them and I've had procurement people fuck that up, royally.
I think they guy I've dealt with there is named Voytek or something along those lines.
I don't think I can help with anything else in there.
Would something like a "Trace Erase" work for pop tank vapour?
I passed on the message. Thank you sir.This quote is hidden because you are ignoring this member. Show Quote
On Sabbatical
For sweetening pots on tanks I have used http://www.odourcontrolsystem.com/ with just a drum of solid chemical off the tank (storage) vents.
Jordan at GCES likely has these depending on your specs. I'll PM you contact info.This quote is hidden because you are ignoring this member. Show Quote
This quote is hidden because you are ignoring this member. Show QuoteOriginally Posted by SugarphreakThis quote is hidden because you are ignoring this member. Show QuoteThis quote is hidden because you are ignoring this member. Show Quote
Thanks. Procurement guy came back and said it looks like that is the system we will end up using. Much appreciated.This quote is hidden because you are ignoring this member. Show Quote
PM'd in response, and much appreciated.This quote is hidden because you are ignoring this member. Show Quote
On Sabbatical
Not sure if this impacts @themack89 but it looks like AUC has shut down a couple of these operations. I get where the homeowners are coming from, but on the flipside getting anything approved in this province that isn't the usual is a nightmare. I've talked to a couple of companies that want to do something different and small scale and they both chose just over the line in Saskatchewan as it is way simpler as far as permitting etc.
The noise was insane was it not? Go set it up in the middle of nowhere and will people complain?This quote is hidden because you are ignoring this member. Show Quote
MAGA Energy lol
I wonder if they have cool hats
Originally posted by Thales of Miletus
If you think I have been trying to present myself as intellectually superior, then you truly are a dimwit.
Originally posted by Toma
fact.This quote is hidden because you are ignoring this member. Show Quote
I think they do. I was chatting with a guy who met with them recently. Couldn't believe the name so he showed me the card haha.This quote is hidden because you are ignoring this member. Show Quote
Hilarious. But hey if you are privately funded who cares.
Originally posted by Thales of Miletus
If you think I have been trying to present myself as intellectually superior, then you truly are a dimwit.
Originally posted by Toma
fact.This quote is hidden because you are ignoring this member. Show Quote
Hi guys, just a brief update.
We energized. It works and it's minting coins.
Unfortunately we can't ramp up to 100% yet because their gas fell off, so we are stuck throttling at 50% plus minus.
However, O&G co is going to tie-in another pad that is flaring too much, so we will have more gas than we need.
We did deal with a noise complaint, it's actually the exhaust fans that are the loudest because the lower frequencies carry farther.
The turbines w/ the mufflers on them, you can't really hear them at all once you get as far as the lease entrance.
We built a really dense hay-bale wall and the complaints have since ceased.
Note: if anyone is ever going to do this, a small thing but a huge thing is to make sure you have someone who lives in the area that can actually service the deployment. Nearest guy we could find who has the skills and the willingness is an hour away, plus he's got a FT job.
Anyways, I am pretty happy. We are still in what we call the "testing" phase because we haven't fully loaded the turbines yet.
Will report back when that happens.
On Sabbatical
What volume of gas are you using per day? Pretty neat project. Agree the small turning generators are reasonably quiet, and at distance it is the kind of sound that fades into the background well.
This quote is hidden because you are ignoring this member. Show Quote
I love this shit, good for you guys for getting up and running.
Very curious to hear whatever details you can share RE: agreements with the well owners, gas volumes, expected ROI, really anything to do with the economics of this stuff. Not trying to get into it myself, I just think it's a great way to use gas that otherwise would have been flared off.
DOES ANYONE NEED A GO-JUICE?
https://www.cbc.ca/news/canada/calga...ties-1.6194653
edit: huh. i guess i shouldnt be shocked cbc is basically recycling https://forums.beyond.ca/threads/413...37#post4996237
Wonder how this may impact themack's operations. AUC states ignorance to the rules is no excuse.