Quantcast
Need Energy: Operator, Landman, Engineer(?) - Page 5 - Beyond.ca - Car Forums
Page 5 of 6 FirstFirst ... 4 5 6 LastLast
Results 81 to 100 of 102

Thread: Need Energy: Operator, Landman, Engineer(?)

  1. #81
    Join Date
    Mar 2007
    Location
    Edmonton area
    My Ride
    Has wheels
    Posts
    770
    Rep Power
    18

    Default

    Quote Originally Posted by themack89 View Post
    This quote is hidden because you are ignoring this member. Show Quote
    Has anyone here ever had to suit up to respond to an H2S incident?
    Few times for incidents, many times in a maintenance situation.

  2. #82
    Join Date
    May 2002
    Location
    Calgary
    My Ride
    6.7 CUMMINS
    Posts
    4,803
    Rep Power
    25

    Default

    Let me guess: Bitfury?
    Machining, Fabricating, Welding etc.

  3. #83
    Join Date
    Dec 2009
    Location
    Calgary
    My Ride
    Gets me to lease
    Posts
    75
    Rep Power
    0

    Default

    Quote Originally Posted by legendboy View Post
    This quote is hidden because you are ignoring this member. Show Quote
    Let me guess: Bitfury?
    No. Custom design. Doesn't really matter though tbh. I've seen a lot of different designs and they all end up being the same in many ways.

    Biggest variations in designs you'd see are what happens when it rains or snows or sand storms (or immersion / air cooled).
    Last edited by themack89; 06-14-2021 at 08:11 AM.
    On Sabbatical

  4. #84
    Join Date
    Jan 2008
    Location
    Duplex
    My Ride
    Tiny hands on a tiny keyboard
    Posts
    9,836
    Rep Power
    67

    Default

    These guys seem to have a plan: https://gam.ai/
    ...

  5. #85
    Join Date
    Dec 2009
    Location
    Calgary
    My Ride
    Gets me to lease
    Posts
    75
    Rep Power
    0

    Default

    Quote Originally Posted by ExtraSlow View Post
    This quote is hidden because you are ignoring this member. Show Quote
    These guys seem to have a plan: https://gam.ai/
    Yeah! There are many more as well, or at least it has become more palatable since BTC ran to the $30k+ range.

    Looking for some help: the project manager for the turbine side is struggling to locate the following:
    • (4) NACE Compliant Parker Style Filters
    • (1) Coalescing Filter
    • (1) Sweetening can for pop tank vapours


    Companies that have already been contacted for the parker filters and coalescing filters:
    • PCF Micron Filtration
    • Propak
    • CBVL Robotics
    • JL Filtration
    • CPS Filtration
    • JCI Group
    • Kirby Controls
    • CEG CreamCo


    Companies that have already been contacted for the sweetening can:
    • AM-Gas
    • Reef Oilfield
    • International Oilfield Brokers
    On Sabbatical

  6. #86
    Join Date
    Jan 2019
    Location
    Egg Sammich
    My Ride
    #SadLife
    Posts
    2,040
    Rep Power
    50

    Default

    Did you contact the correct JCI? There's like 30 of them and I've had procurement people fuck that up, royally.
    I think they guy I've dealt with there is named Voytek or something along those lines.

    I don't think I can help with anything else in there.
    Would something like a "Trace Erase" work for pop tank vapour?

  7. #87
    Join Date
    Dec 2009
    Location
    Calgary
    My Ride
    Gets me to lease
    Posts
    75
    Rep Power
    0

    Default

    Quote Originally Posted by ThePenIsMightier View Post
    This quote is hidden because you are ignoring this member. Show Quote
    Did you contact the correct JCI? There's like 30 of them and I've had procurement people fuck that up, royally.
    I think they guy I've dealt with there is named Voytek or something along those lines.

    I don't think I can help with anything else in there.
    Would something like a "Trace Erase" work for pop tank vapour?
    I passed on the message. Thank you sir.
    On Sabbatical

  8. #88
    Join Date
    Oct 2005
    Location
    Calgary
    My Ride
    Grimace
    Posts
    6,725
    Rep Power
    24

    Default

    For sweetening pots on tanks I have used http://www.odourcontrolsystem.com/ with just a drum of solid chemical off the tank (storage) vents.

  9. #89
    Join Date
    May 2004
    Location
    Calgary
    My Ride
    Ford, Acura, my wife's nerves
    Posts
    1,896
    Rep Power
    25

    Default

    Quote Originally Posted by themack89 View Post
    This quote is hidden because you are ignoring this member. Show Quote

    Looking for some help: the project manager for the turbine side is struggling to locate the following:
    • (4) NACE Compliant Parker Style Filters
    • (1) Coalescing Filter
    Jordan at GCES likely has these depending on your specs. I'll PM you contact info.
    Quote Originally Posted by rage2
    This quote is hidden because you are ignoring this member. Show Quote
    ...Last thing I want is someone reading my posts and losing their cock over it...
    Quote Originally Posted by Sugarphreak
    This quote is hidden because you are ignoring this member. Show Quote
    Meh, they all look like Jackie Chan to me
    Quote Originally Posted by ExtraSlow View Post
    This quote is hidden because you are ignoring this member. Show Quote
    Which one has best efficacy at enlarging my dank?

  10. #90
    Join Date
    Dec 2009
    Location
    Calgary
    My Ride
    Gets me to lease
    Posts
    75
    Rep Power
    0

    Default

    Quote Originally Posted by schocker View Post
    This quote is hidden because you are ignoring this member. Show Quote
    For sweetening pots on tanks I have used http://www.odourcontrolsystem.com/ with just a drum of solid chemical off the tank (storage) vents.
    Thanks. Procurement guy came back and said it looks like that is the system we will end up using. Much appreciated.

    Quote Originally Posted by schurchill39 View Post
    This quote is hidden because you are ignoring this member. Show Quote
    Jordan at GCES likely has these depending on your specs. I'll PM you contact info.
    PM'd in response, and much appreciated.
    On Sabbatical

  11. #91
    Join Date
    Mar 2014
    Location
    Calgary
    My Ride
    2011 Audi A6 Avant
    Posts
    15
    Rep Power
    0

    Default

    Not sure if this impacts @themack89 but it looks like AUC has shut down a couple of these operations. I get where the homeowners are coming from, but on the flipside getting anything approved in this province that isn't the usual is a nightmare. I've talked to a couple of companies that want to do something different and small scale and they both chose just over the line in Saskatchewan as it is way simpler as far as permitting etc.

  12. #92
    Join Date
    Mar 2011
    Location
    Calgary
    Posts
    311
    Rep Power
    11

    Default

    Quote Originally Posted by JPB View Post
    This quote is hidden because you are ignoring this member. Show Quote
    Not sure if this impacts @themack89 but it looks like AUC has shut down a couple of these operations. I get where the homeowners are coming from, but on the flipside getting anything approved in this province that isn't the usual is a nightmare. I've talked to a couple of companies that want to do something different and small scale and they both chose just over the line in Saskatchewan as it is way simpler as far as permitting etc.
    The noise was insane was it not? Go set it up in the middle of nowhere and will people complain?

  13. #93
    Join Date
    Jul 2010
    Location
    Not the NE
    My Ride
    Blue Dabadee
    Posts
    7,127
    Rep Power
    51

    Default

    MAGA Energy lol

    I wonder if they have cool hats
    Originally posted by Thales of Miletus

    If you think I have been trying to present myself as intellectually superior, then you truly are a dimwit.
    Originally posted by Toma
    fact.

  14. #94
    Join Date
    Mar 2011
    Location
    Calgary
    Posts
    311
    Rep Power
    11

    Default

    Quote Originally Posted by killramos View Post
    This quote is hidden because you are ignoring this member. Show Quote
    MAGA Energy lol

    I wonder if they have cool hats
    I think they do. I was chatting with a guy who met with them recently. Couldn't believe the name so he showed me the card haha.

  15. #95
    Join Date
    Jul 2010
    Location
    Not the NE
    My Ride
    Blue Dabadee
    Posts
    7,127
    Rep Power
    51

    Default

    Hilarious. But hey if you are privately funded who cares.
    Originally posted by Thales of Miletus

    If you think I have been trying to present myself as intellectually superior, then you truly are a dimwit.
    Originally posted by Toma
    fact.

  16. #96
    Join Date
    Dec 2009
    Location
    Calgary
    My Ride
    Gets me to lease
    Posts
    75
    Rep Power
    0

    Default

    Hi guys, just a brief update.

    We energized. It works and it's minting coins.
    Unfortunately we can't ramp up to 100% yet because their gas fell off, so we are stuck throttling at 50% plus minus.
    However, O&G co is going to tie-in another pad that is flaring too much, so we will have more gas than we need.
    We did deal with a noise complaint, it's actually the exhaust fans that are the loudest because the lower frequencies carry farther.
    The turbines w/ the mufflers on them, you can't really hear them at all once you get as far as the lease entrance.
    We built a really dense hay-bale wall and the complaints have since ceased.

    Note: if anyone is ever going to do this, a small thing but a huge thing is to make sure you have someone who lives in the area that can actually service the deployment. Nearest guy we could find who has the skills and the willingness is an hour away, plus he's got a FT job.

    Anyways, I am pretty happy. We are still in what we call the "testing" phase because we haven't fully loaded the turbines yet.
    Will report back when that happens.
    On Sabbatical

  17. #97
    Join Date
    Jan 2008
    Location
    Duplex
    My Ride
    Tiny hands on a tiny keyboard
    Posts
    9,836
    Rep Power
    67

    Default

    What volume of gas are you using per day? Pretty neat project. Agree the small turning generators are reasonably quiet, and at distance it is the kind of sound that fades into the background well.
    ...

  18. #98
    Join Date
    Jun 2006
    Location
    Calgary/Kelowna
    My Ride
    Lives in the left lane.
    Posts
    562
    Rep Power
    16

    Default

    I love this shit, good for you guys for getting up and running.

    Very curious to hear whatever details you can share RE: agreements with the well owners, gas volumes, expected ROI, really anything to do with the economics of this stuff. Not trying to get into it myself, I just think it's a great way to use gas that otherwise would have been flared off.
    DOES ANYONE NEED A GO-JUICE?

  19. #99
    Join Date
    Oct 2005
    Location
    Calgary
    My Ride
    '16 F-150 Lariat 5.0
    Posts
    532
    Rep Power
    18

    Default

    https://www.cbc.ca/news/canada/calga...ties-1.6194653

    edit: huh. i guess i shouldnt be shocked cbc is basically recycling https://forums.beyond.ca/threads/413...37#post4996237

  20. #100
    Join Date
    Jul 2006
    Location
    Victoria Park
    My Ride
    '16 FoRS, '09 UZN215, '90 Z32, '15 Grom
    Posts
    3,949
    Rep Power
    42

    Default

    Wonder how this may impact themack's operations. AUC states ignorance to the rules is no excuse.

Page 5 of 6 FirstFirst ... 4 5 6 LastLast

Similar Threads

  1. Power Engineer/Plant Operator

    By stealth in forum Careers
    Replies: 16
    Latest Threads: 08-22-2010, 09:51 AM
  2. Direct energy - Energy consultant

    By shynepho in forum Careers
    Replies: 7
    Latest Threads: 06-09-2010, 04:08 PM
  3. Replies: 11
    Latest Threads: 11-05-2009, 10:36 AM
  4. Replies: 0
    Latest Threads: 06-17-2008, 03:09 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •