Quantcast
2006 Lancer Ralliart Manual transmission difficult shifting - Beyond.ca - Car Forums
Results 1 to 7 of 7

Thread: 2006 Lancer Ralliart Manual transmission difficult shifting

  1. #1
    Join Date
    Jul 2007
    Location
    calgary
    My Ride
    2007 Lancer Ralliart
    Posts
    11
    Rep Power
    0

    Default 2006 Lancer Ralliart Manual transmission difficult shifting

    I have a 2006 Lancer Ralliart, and I was getting gas, and when I turned the car back on the transmission started having difficulty going into gear.

    If I turn the car off and shift it into gear and back on I can start driving and if the car is moving I can shift it into gear, but if I am at a dead stop there is no way to shift it into gear.

    I installed a brand new clutch back in Dec 2020 and my mechanic can't figure it out without taking off the trans and charging me a boat load of money.



    Anyone have previous experience with a problem like this?

  2. #2
    Join Date
    Feb 2003
    Location
    DT 780
    My Ride
    LEXUS LX470
    Posts
    1,220
    Rep Power
    31

    Default

    Im not familiar with that platform but is it a hydraulic clutch line? Check for leaks at slave and master cylinder? Maybe got some air in the system which would make sense on a 1st gear difficult to engage.
    Tap, Rack, BANG!

  3. #3
    Join Date
    Apr 2008
    Location
    calgary
    My Ride
    CLK 55 / 2g Eclipse / EP3
    Posts
    4,422
    Rep Power
    21

    Default

    Def. check fluid level. My older 2G eclipse blew a master cylinder and leaked it all over the interior. Harder and harder to get in gear.
    Last edited by revelations; 03-27-2021 at 06:17 PM.

  4. #4
    Join Date
    Jul 2007
    Location
    calgary
    My Ride
    2007 Lancer Ralliart
    Posts
    11
    Rep Power
    0

    Default

    Master clutch cylinder? I am going to order a new master and slave once they get back in stock. I think that might be the problem, it seems to be what everyone else is thinking too. Also someone pitched the idea of a throw bearing? No idea what that is.

  5. #5
    Join Date
    Apr 2008
    Location
    calgary
    My Ride
    CLK 55 / 2g Eclipse / EP3
    Posts
    4,422
    Rep Power
    21

    Default

    Are you getting noise when its in neutral with the clutch in? And then the noise goes away when you release the clutch? Thats a throw bearing (I could have it backwards too).
    Last edited by revelations; 03-28-2021 at 07:50 PM.

  6. #6
    Join Date
    Jul 2007
    Location
    calgary
    My Ride
    2007 Lancer Ralliart
    Posts
    11
    Rep Power
    0

    Default

    no noise in neutral

  7. #7
    Join Date
    Sep 2016
    Location
    Calgary, Ab
    My Ride
    2021 Zonda CRV
    Posts
    916
    Rep Power
    13

    Default

    I had the same issue with my Zonda two years ago. I could not get into gear and I was stuck on 14th St.
    It was the master cylinder. I never changed the fluid, so overtime air gets in and it just goes.

Similar Threads

  1. LF: 2006 mitsubishi lancer ralliart service manual

    By gam0s in forum Automotive Parts
    Replies: 0
    Latest Threads: 02-15-2010, 12:16 PM
  2. FS 2006 Mitsu Lancer Ralliart

    By Artega in forum Cars, Trucks, Motorbikes, and Trailers
    Replies: 5
    Latest Threads: 04-12-2008, 01:43 PM
  3. FS: 2006 Gray Lancer Ralliart

    By bremorr in forum Cars, Trucks, Motorbikes, and Trailers
    Replies: 9
    Latest Threads: 10-11-2007, 08:32 AM
  4. FS: 2006 Mitsubishi Lancer RalliArt

    By jayboy0812 in forum Cars, Trucks, Motorbikes, and Trailers
    Replies: 3
    Latest Threads: 06-05-2006, 01:18 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •