Ok, so some of you are aware of my wiper problem (not having intermittent setting on the front wipers, and not having anything happen in the back end at all).
So today I attempted to tackle the rear motor, its easily accessible and only 3 screws to get to it.
Anyways I opened her up and saw initially that the power connector was not attached. Thinking how easy it was to fix I was quite happy. I got into the car and started it up, tried the back wiper, nothing, tried the front wipers nothing. Blown fuse...
So I disconnected the rear motor again, and put in another 20A fuse and started up the car, the front wipers worked (with no intermittent setting) again. So I tried everything again with this new fuse and connected the rear wiper motor to power again. Right way when I start the engine (possibly when I flip either wiper switch) the fuse blows again...............
So I have the rear motor disconnected again and a new 20A fuse in the box. The front works as before.
Is there any suggestions, has anyone encountered this before.
I copied down the name and part number on the Wiper Motor. Maybe one of you guys can check to see if its the right one for me.
I can tell that mine is a new motor, due to how clean it looks, but it may be the wrong one?
It is a:
Denso 159100-9833
12Volt
12P
Thanks guys,
David