Quantcast
O2 simulator anyone have any thoughts about this? - Beyond.ca - Car Forums
Results 1 to 16 of 16

Thread: O2 simulator anyone have any thoughts about this?

  1. #1
    Join Date
    Oct 2002
    Location
    Calgary
    My Ride
    12 FJ, 06 YZ250, 77 kz1000, 82 GPZ1100, 81 TR-1
    Posts
    2,897
    Rep Power
    12

    Default O2 simulator anyone have any thoughts about this?

    I realize its just a resistor fakin a voltage signal. I'm curious to know if it works well or not.

    -----------------------------------
    OBDII cars have two oxygen sensors to measure the amount of oxygen contained in the exhaust gas. The first sensor is located on the manifold or header and measures O2 content of the exhaust as it escapes from the cylinders. This sensor is used by the PCM/ECM to calculate fuel trims and look for combustion problems. The second oxygen sensor is located after the catalytic converter and is used only to measure catalytic converter efficiency. The PCM/ECM does NOT use any data from the secondary O2 sensor for engine management. The PCM will set an CEL(check engine light)/SES (service engine soon)/MIL(Malfunction Indicator Lamp) light if the catalytic converter is removed, the sensor is removed, or the sensor goes bad.

    When the test pipe is installed and the converter is removed it is necessary to verify that nothing else sets CEL/SES/MIL light and the car can pass OBD emission inspection. The O2 Sensor Simulator will simulate sensor proper signal and will not let the PCM/ECM to store the error code and set CEL/SES/MIL light.
    ----------------------------------------------

    http://www.o2simulator.com/

  2. #2
    Join Date
    Oct 2002
    Location
    Calgary
    My Ride
    12 FJ, 06 YZ250, 77 kz1000, 82 GPZ1100, 81 TR-1
    Posts
    2,897
    Rep Power
    12

    Default

    Also found this do it your self one.

    http://www.mkiv.com/techarticles/oxy...sor_simulator/

  3. #3
    Join Date
    Jan 2004
    Location
    Home of the Flames beaotch
    My Ride
    the bandwagon!
    Posts
    2,533
    Rep Power
    11

    Default

    i started to understand what they were talking about and then i became lost! so is what their saying that you just make something to fool you ECU into thinking that no-cat applications will trick the ECU into thinking that their is a cat and no problem!

    I know the comtech race header for the DC5 include a new harness to take care of that problem as it eliminates the cat.

  4. #4
    Join Date
    Jan 2005
    Location
    Calgary
    My Ride
    YZ250
    Posts
    495
    Rep Power
    0

    Default

    Or you can just get a little threaded extension piece to add on the o2 sensor bung which pulls it out of the flow, so it reads slightly cooler as it would after a cat....
    Attached Images Attached Images

  5. #5
    Join Date
    Sep 2003
    Location
    Calgary Alberta
    My Ride
    ...BNT0B0X...
    Posts
    8,728
    Rep Power
    17

    Default

    ^^^I've read about that...but never known anyone to use it and for it to work...when I used to work in parts...the V8 boys were telling me (the lil import kid) to try i...never got around to doing so...but I guess if there are other people that know about it it must kinda work...

    the principle of the idea in theory sounds sane...

  6. #6
    Join Date
    Aug 2004
    Location
    calgary
    Posts
    287
    Rep Power
    0

    Default

    I have the steeda eliminators in my truck, the work great.

    My truck went really really rich after removal of catalytic converters, this caused an engine trouble code, put the eliminators now mixture is correct and no codes.

    No problems after 30k's.

    I would suggest getting them/

  7. #7
    Join Date
    Oct 2002
    Location
    Calgary
    My Ride
    12 FJ, 06 YZ250, 77 kz1000, 82 GPZ1100, 81 TR-1
    Posts
    2,897
    Rep Power
    12

    Default

    Originally posted by gorillam
    I have the steeda eliminators in my truck, the work great.

    My truck went really really rich after removal of catalytic converters, this caused an engine trouble code, put the eliminators now mixture is correct and no codes.

    No problems after 30k's.

    I would suggest getting them/
    sweet.

  8. #8
    Join Date
    Sep 2002
    Location
    CSpot
    My Ride
    11 sec weather van
    Posts
    720
    Rep Power
    10

    Default

    Originally posted by gorillam
    I have the steeda eliminators in my truck, the work great.

    My truck went really really rich after removal of catalytic converters, this caused an engine trouble code, put the eliminators now mixture is correct and no codes.

    No problems after 30k's.

    I would suggest getting them/
    Removing the cats will not cause a rich condition on your truck. The cats are there to "recycle" excess hydrocarbons in the exhaust stream, and if they're removed, the hydrocarbons will exit the tail pipe. This results in your exhaust smelling rich.

    The check engine coming on after removal of the cats is just that... An annoying light. No fuel or timing changes are made by the ecu with a failed secondary 02 sensor code. All the secondary 02s are there for is monitors oxygen levels after the cats to make sure that they're doing their job.

    For Ford vehicles, i've used the mil eliminators (or stimulators) on numerous cars, and they do work.
    As an alternative to the mil eliminator, i often turn off the rear 02 heaters when tuning ford cars using my chip software. That does the same thing....
    Matt
    Ford tuning guy...

    I have too much respect for the idea of God to make it responsible for such an absurd world.
    Georges Duhamel

    joke of the day:
    Originally posted by Danger_Mouse
    There is a replacement for displacement. It's called technology.

  9. #9
    Join Date
    Feb 2004
    Location
    C-Town
    My Ride
    X3M Competition
    Posts
    7,219
    Rep Power
    17

    Default

    Ha Ha. Wade, you should have asked me. I have one that I made for $5.00 and put it right under the driver's seat carpet in my Eclipse.

    http://www.vfaq.com/mods/O2bypass.html

  10. #10
    Join Date
    Oct 2002
    Location
    Calgary
    My Ride
    12 FJ, 06 YZ250, 77 kz1000, 82 GPZ1100, 81 TR-1
    Posts
    2,897
    Rep Power
    12

    Default

    Originally posted by heavyD
    Ha Ha. Wade, you should have asked me. I have one that I made for $5.00 and put it right under the driver's seat carpet in my Eclipse.

    http://www.vfaq.com/mods/O2bypass.html
    Oh, ok. When I was talking to you about it the other day you did not mention it. It's probly the same config as your mitsu, so 5 dollar fix sounds good to me.

  11. #11
    Join Date
    May 2002
    Location
    Calgary, Alberta
    My Ride
    19 F150 Crew 2.7
    Posts
    3,621
    Rep Power
    13

    Default

    http://www.mileliminators.com/

    That's what I use for my WRX.


  12. #12
    Join Date
    Feb 2004
    Location
    C-Town
    My Ride
    X3M Competition
    Posts
    7,219
    Rep Power
    17

    Default

    Originally posted by Hollywood


    Oh, ok. When I was talking to you about it the other day you did not mention it. It's probly the same config as your mitsu, so 5 dollar fix sounds good to me.
    The only problem is that a 12ohm/12 watt resistor isn't easy to find and like the thread says, you can't skimp on that part. I can attest personally that using a 10 watt will make alot of smell and enough heat to warm your bum. Fortunately a guy in our Mississauga office found one for me.

    If I had known about:
    http://www.mileliminators.com/
    I may have just bought one of those. If you want I will go halfers as it's (2) for $29.95. If mine ever craps out again it's going to be hard to find another 12 watt resistor.

  13. #13
    Join Date
    Mar 2003
    Location
    Calgary
    Posts
    5,401
    Rep Power
    15

    Default

    I was considering it for a while too, but it sounds pretty risky. Your CEL could be on and you wouldn't even know! But if you're only blocking the CEL due to the secondary O2 sensor then it probably won't be a huge deal.

    Converting to OBD1 might be a better idea...

  14. #14
    Join Date
    Feb 2004
    Location
    C-Town
    My Ride
    X3M Competition
    Posts
    7,219
    Rep Power
    17

    Default

    Originally posted by richardchan2002
    I was considering it for a while too, but it sounds pretty risky. Your CEL could be on and you wouldn't even know! But if you're only blocking the CEL due to the secondary O2 sensor then it probably won't be a huge deal.

    Converting to OBD1 might be a better idea...
    There is absolutely no risk in the mod. The second O2 sensor is only there to ensure that the catalytic converter is working properly. Since you have no cat, it isn't a problem. Every OBDII car has the same CEL codes. You're only blocking the one code.

  15. #15
    Join Date
    Oct 2002
    Location
    Calgary
    My Ride
    12 FJ, 06 YZ250, 77 kz1000, 82 GPZ1100, 81 TR-1
    Posts
    2,897
    Rep Power
    12

    Default

    Originally posted by heavyD
    I may have just bought one of those. If you want I will go halfers as it's (2) for $29.95. If mine ever craps out again it's going to be hard to find another 12 watt resistor.
    Ok I will let you know soon.


    Originally posted by richardchan2002
    I was considering it for a while too, but it sounds pretty risky. Your CEL could be on and you wouldn't even know! But if you're only blocking the CEL due to the secondary O2 sensor then it probably won't be a huge deal.

    Converting to OBD1 might be a better idea...
    Are you being serious? Converting a harness and ECU to OBD1? Instead of putting in a 10 dollar resistor?

    Not all cars are honda's, meaning not all cars have obd conversion harnesses readily available.

  16. #16
    Join Date
    Mar 2003
    Location
    Calgary
    Posts
    5,401
    Rep Power
    15

    Default

    Hahaha. I'm living in Honda-land.

    It looks like it only blocks the one code for the secondary O2 sensor, so it sounds quite reasonable.

Similar Threads

  1. Buying an 04 jetta TDI, any thoughts?

    By KAG in forum General Car/Bike Talk
    Replies: 19
    Latest Threads: 08-04-2004, 11:23 PM
  2. amazing racing simulator game

    By corvettekid in forum Cars, Bikes, Machines
    Replies: 10
    Latest Threads: 03-20-2004, 12:16 PM
  3. Good grief - a turbo simulator...

    By fast95pony in forum General Car/Bike Talk
    Replies: 8
    Latest Threads: 02-29-2004, 10:06 PM
  4. V300 vs GD88-- Any Thoughts??

    By StRiCkLyReDlInE in forum Computers, Consoles, and other Electronics
    Replies: 5
    Latest Threads: 11-19-2003, 08:22 PM
  5. Replies: 20
    Latest Threads: 11-14-2003, 05:59 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •