Digi 240

[AznDragon2004]

I need some help with digi 240 at SAIT.

Please give me a pm if you can help. Thanks

[koopkoop2]

Ah, memories.

What do you need? Are you in ENT or CNT? I graduated from ENT.

[Davetronz]

I graduated from CNT...
Digi 240 with Bala, that was good times...

1's and 0's!

Wait until ELCM345 (if you are in CNT), that is tough shit.

[Despair*]

Yeah, I didn't like Data Comms at all either. Make sure if you reach that class that you purchase a textbook. It would of helped me if I had one. Are they running 240 on the spring?

[AznDragon2004]

Originally posted by FastDak318
I graduated from CNT...
Digi 240 with Bala, that was good times...

1's and 0's!

Wait until ELCM345 (if you are in CNT), that is tough shit.

I had Bala as my math 235 teacher.

Anyways I just need some help with my labs. Give me a pm for more info thanks.

[wildrice]

Digi 240 lab was pretty simple. Much easier than Cmph 200.
W/c lab are you on?

[AznDragon2004]

I'm doing the distance course. Just starting on lab 1

[koopkoop2]

Isn't lab 1 AND gates?

You should post it in this thread, instead of dealing with through PMs. That way your potential for a good answer is greatly increased. Unless, there's a personal reason you would rather not post in the public forum...

[AznDragon2004]

I not sure what to do. The instructions aren't that clear. Do i need some software for the pc?

[koopkoop2]

More details please. I doubt this is possible, but can you provide a link or a screenshot of the section you're having difficulties with?

[Despair*]

Lab #1 is on switches and LED's. Looks like for the first part of the lab they want you to construct a simulation in EWB software (Electronic Work Bench). If you are part of E-Learning and you have a laptop the software should already be on your system.

[digi355]

If you have your bread board and you cant turn the LED's on for lab one stop what your doing and drop out. No offence but it is going to get allot harder. If thats not your problem post your lab and ill do it for you.

[koopkoop2]

^^

ROFL. I hope your name isn't based on the SAIT course.

[Despair*]

Originally posted by koopkoop2
^^

ROFL. I hope your name isn't based on the SAIT course.

hahahaha. Thats tooo funny. When I first started out on lab 1 I wasn't too good at the stuff, but after a bit of practice and review, I learnt the material and found the labs extremely easy.

[koopkoop2]

Yeah, dude.

I loved digi. Out of everything I learned at SAIT, digi was one of the things that came extremely naturally.

What program did you graduate from and what are you doing now?

[Despair*]

^ Yeah Digi was definately one of my more enjoyable classes. One of the only final I didn't really worry about as the material I found was super easy for me. I graduated from CNT in December of 2004. Right now I am actually working in an ICT entry level type of position. Going to be awhile before I can advance, but its just like everyone else. Need to get 2 years of experience before I can start working my way up the chain to better positions.

[AznDragon2004]

Anyone here else has taken Digi 240?

[AznDragon2004]

I'll just explain what is happening with Digi 240. Right now i'm in GTS (general tech studies) but going into Electrical Engineering Technology in the fall. Orginally I applied for Electronics Engineering but decided I didn't want to take that program, that is why i'm in digi 240. In electrical digi 240 isn't required so right now I just need to finish this course.

So that is the story.

I just need to finish this course

[AznDragon2004]

bump

[vinsane]

Ahhh the days of ENT....

I'd still be there if Jessop wasn't a complete dickhead, and failed me in ELTR-294...