Originally Posted by
colsankey
Been a day!
Went to Canadian Tire, only fuse they had was (5) 3A in a box of 40 with an assortment of 5,10,20,30A fuses. Anyone want 27 fuses, lol!
Swapped fuse, reset breaker, flipped power switch, no lights, fuck. Reset breaker and switch a second time, double checked wires, still nothin, so broke down and called Action Furnace. Buddy threw 2” of teflon tape on the furnace door switch and 3-5s later the control board light came back on and furnace fired up. Double fuck, i assumed the lights would come back on after the fuse swap and resetting the breaker, but it looks like it needed to be held closed a bit longer than i was holding it to reset.
Even taking the tape off after didnt reset in the LEDs going off.
In the end a bit of stress worrying it was going to be costly or a long repair, but it all worked out and only cost $50 in diagnostics and then $30 for the worlds most eclectic fuse box.
I had held the door switch down a few seconds in my testing, but kept releasing it to check other things. Tech