PM Me if you have experience with fender rolling and your either willing to give tips, know a good place to have it done, or you can do it yourself.
low offset rims on the way for my 90' 240sx. Need to free up sum space.
thanks,
PM Me if you have experience with fender rolling and your either willing to give tips, know a good place to have it done, or you can do it yourself.
low offset rims on the way for my 90' 240sx. Need to free up sum space.
thanks,
rent a fender roller, or if u ask the boys and girls at TnT i know they have one and MAAAYBE just mayyybe they will help you out...
a good fender rolling job will roll it VERY nicely without damaging paint and keeping it skuff free, i got the rear right quarter done on my car new paint and metal, last thing i wanted was to wreck it so i did it right and was super happy.
RIDES: 94' EH2: Sold, 98' DC4 sold, 93 S13 sold, 93 S14 the lead sled
1992 Honda EG6 SiR for sale!:ONLY! $4900.00Message me for more info!
I decided to roll my own fenders when trying to fit a set of 335/30/18 on 12x18 wheels on the back of my car. It's very easy. You need a fender roller ($400), a heat gun ($20) and lots of patience (priceless).
Get the paint hot to the touch and gently move the roller from 1 side to the other, while constantly heating the paint in front of the roller. Once a pass has been made, tighter the roller up a bit and repeat. Keep going untill the desired roll is complete. Once the car is up on jacks with the tires off, it should take 1/2 hour at the most per wheel.
Pic...