HUGE FS:Drift FC3S part out, universal, LOTS! LOOK!
Contact:
Braden Smith
email/MSN: [email protected]
Phone: 403.813.4925 (after 4PM Mountain time)
Shipping:
Everything located in Calgary, Alberta, Canada
I will ship most anything, However, don't ask me for a quote, Please get yourself a quote, and
include it in your offer.
My postal code is T2Z 1R8
I will use Canada Post, UPS, or Fedex
Shipping is included to anywhere in north America on items that say "SHIPPED"
Prices and payment:
All prices obo. Don't lowball.
Paypal: [email protected]
All prices in CND funds
Notes to take into consideration:
-I'm very busy. I may not be able to reply until weekends. Please be patient.
-Don't Lowball, If you don't find a price is fair, feel free to offer me what you think its
worth.
-All prices are OBO
-Some parts will not be available until February.
-No calling dibs, first person with money gets the item.
-All prices CND
-Add 4% if paying with paypal for the fee
MISC AFTERMARKET
----------------
1) SS T-Bolt clamps
2x 0350 - Fits OD from 3.30"-3.59"
2x 0312 - Fits OD from 2.90"-3.21"
$7 each shipped
http://i19.photobucket.com/albums/b1...314/clamps.jpg
http://i19.photobucket.com/albums/b1...14/clamps1.jpg
2) 3" Vibrant coupler red
Opened
$8 shipped
http://i19.photobucket.com/albums/b1...3314/3inch.jpg
3)2" Vibrant coupler red
opened
$8 shipped
http://i19.photobucket.com/albums/b1...3314/2inch.jpg
4) 21" long tube of 2.5" black coupler
$35 shipped
http://i19.photobucket.com/albums/b1...inchof2.5a.jpg
5) SS 2.5" clamps
Two of them
Opened
$5 each shipped
http://i19.photobucket.com/albums/b1...inchclamps.jpg
6)Momo steering wheel
http://i19.photobucket.com/albums/b1...3314/momo2.jpg
http://i19.photobucket.com/albums/b1...3314/momo1.jpg
7)URAS hood vent
holes from rivets
Few chips, nothing major
$100
http://i19.photobucket.com/albums/b1...314/devin1.jpg
http://i19.photobucket.com/albums/b1...C3S/vent-1.jpg
AFTERMARKET FC
--------------
8) Koyo Rad. FC3S w/ electric fan
Not the best condition, dent in the bottom from bad jacking point.
Some fins are bent
No leaks
$150
http://i19.photobucket.com/albums/b1...3314/koyo1.jpg
http://i19.photobucket.com/albums/b1...3314/koyo2.jpg
http://i19.photobucket.com/albums/b1...3314/koyo3.jpg
http://i19.photobucket.com/albums/b1...3314/koyo4.jpg
http://i19.photobucket.com/albums/b1...3314/koyo5.jpg
9) Custom FMIC
2.5" piping
Goes around stock PS pump
A/C must be removed
2 Holes required
May require the removal of the washer fluid reservoir
Couplers and clamps included. + block of plate for BOV flange
Huge greddy racing BOV and Greddy compression tube (TB adapter)
$600
http://i19.photobucket.com/albums/b1...tercooler1.jpg
http://i19.photobucket.com/albums/b1...tercooler2.jpg
http://i19.photobucket.com/albums/b1...tercooler3.jpg
http://i19.photobucket.com/albums/b1...tercooler4.jpg
http://i19.photobucket.com/albums/b1...tercooler5.jpg
http://i19.photobucket.com/albums/b1...tercooler6.jpg
http://i19.photobucket.com/albums/b1...tercooler7.jpg
http://i19.photobucket.com/albums/b1...tercooler8.jpg
http://i19.photobucket.com/albums/b1...ers-bov024.jpg
10) Turbonetics T04B Turbo KIT
External wastegate
Oil cooled
SS oil line comes with
Compressor
Trim: 54
Inlet: 2.75"
Outlet: 2"
Turbine I believe it the original HKS T04E turbine and center section.
A/R: ?1.?
Flange: T4
Vband exit
HKS cast manifold for FC3S
External wastegate
HKS Downpipe
Vband
Hole where the bracket is, can be welded.
HKS Wastegate w/ dumptube
$700
http://i19.photobucket.com/albums/b1...FC3S/RB047.jpg
http://i19.photobucket.com/albums/b1...ilding1008.jpg
http://i19.photobucket.com/albums/b1...ilding1007.jpg
http://i19.photobucket.com/albums/b1...ilding1009.jpg
http://i19.photobucket.com/albums/b1...ldpart2006.jpg
11) JDM S5 Diff w/ LSD
Unsure of what kind.
Aftermarket LSD, most likely 1.5way
Works good
Quiet
Redline Oil
$500
12)BN Sport Kit.
Sides and rear are new
Front bumper is trashed, but fixable, have all peices
$450 pick up only
13)URAS Rear and sides.
thrashed
$75
14) Walbro 255lph fuel pump, already in S4 assembly
$60 shipped
15) 720cc RC engineering Saturated (high imp)
$120 shipped
16) Exhaust system. SS test pipe and mid pipe. HKS Hi-Power rear section, Custom built from a
R34 GTR rear section. Also includes SS rear straight pipe with twin exit. Both exit on USDM
Drivers side. Both used.Both noisy. No silencers.
$300
http://i19.photobucket.com/albums/b1...FC3S/RB017.jpg
http://i19.photobucket.com/albums/b1...ldpart5002.jpg
http://i19.photobucket.com/albums/b1...ldpart5002.jpg
http://i19.photobucket.com/albums/b1...ldpart5001.jpg
http://i19.photobucket.com/albums/b1...newexhaust.jpg
17) URAS drift pineapples (For your rear subframe)
$50 shipped
http://i19.photobucket.com/albums/b1...Pineapples.jpg
18)Silkroad RM/A8 FC3S
http://www.silkroad-usa.com/
8kg/mm front 6kg/mm rear
Amazing coilovers, 8 way dampening adjustable
$1100
19)Kaaz S4 TII two-way clutch type LSD
BNIB
$800
20)Cusco Safety 21 Roll cage, w/ door bars
Painted purple
$700
http://i19.photobucket.com/albums/b1...3314/cage8.jpg
http://i19.photobucket.com/albums/b1...3314/cage7.jpg
http://i19.photobucket.com/albums/b1...3314/cage6.jpg
http://i19.photobucket.com/albums/b1...3314/cage5.jpg
http://i19.photobucket.com/albums/b1...3314/cage3.jpg
http://i19.photobucket.com/albums/b1...14/cage2-2.jpg
http://i19.photobucket.com/albums/b1...3314/cage1.jpg
21)FC3s steering wheel hub
$50
22)FC3s Toe hooks
$80 shipped
http://i19.photobucket.com/albums/b1...83314/toe2.jpg
http://i19.photobucket.com/albums/b1...83314/toe1.jpg
23)Bride bucket seat w/ L FC3srail - Super low
30-34 waist-ish
$400
http://i19.photobucket.com/albums/b1...3314/cage4.jpg
http://i19.photobucket.com/albums/b1...S/DSCN3460.jpg
24)Bride bucket seat w/ R FC3S rail
30-34 waist-ish
$400
http://i19.photobucket.com/albums/b1...3314/bride.jpg
25)Bottom of Redline MT90 transmission fluid
$10
26)4 point Harness
out of date
$75
http://i19.photobucket.com/albums/b1...3314/cage4.jpg
http://i19.photobucket.com/albums/b1...3314/cage1.jpg
http://i19.photobucket.com/albums/b1.../DSCN3460.jpgr
27)GAUGES:
OMNI(JDM)? 52mm water temp(C), oil temp(C), oil pressure 3 in holder
With sensors, and oil adapter, upper rad hose with sensor
$250
Old GReddy Boost huge, with holder
$50
Autometer 52mm EGT (F) with sensor and single holder, white face, standard
$100
Autometer AFR W/ single holder - white face, standard
$25
http://i19.photobucket.com/albums/b1...14/FC3S/18.jpg
28)5 Lug conversion With JDM S5 TII Brakes (4pot front)
Hawk pads and new rotors in the front
Hawk pads (not installed for rear) come with
Will need need rear rotors
Front arms w/ poly. Bushings installed
Rear with DTSS removal bushings installed
$500
29)Racing Beat rear sway bar
$50
30)SuperNow! Tie rods w/ inner spacers for angle
Installed on PW steering rack.
$350
OEM FC
------
31) Running, J-spec, S5 engine. TII
Mostly stock
Runs good.
Transmission included
Bellhousing is cracked
ACT 4puck (4000kms)
lightened steel flywheel (might keep)(4000kms)
No Exhaust mani,turbo ect.
No A/c pump
No Power steering pump
I dont know how many km's are on it, so don't ask
Odometer is around 160,000KM. But I suspect a rebuild.
I drove it for 4months w/o any problems
Compression test:
Front Rotor: http://s19.photobucket.com/albums/b197/braden883314/?
action=view¤t=Compressiontest-FrontRotor.flv
Rear Rotor: http://s19.photobucket.com/albums/b197/braden883314/?
action=view¤t=Compressiontest-RearRotor.flv
Motor running: http://s19.photobucket.com/albums/b197/braden883314/?
action=view¤t=MOV01801.flv
Jan 4th, 2008
$1200
32) S5 ECU, rom tuned for T04e
$50 shipped
http://i19.photobucket.com/albums/b1...FC3S/RB005.jpg
33) JDM S5 TurboII engine harness
$50 Shipped
34) JDM S5 TurboII driveshaft
$100
35) JDM S5 turboII halfshafts
$100
36) JDM S5 idiot cluster
$10 shipped
http://i19.photobucket.com/albums/b1...4/DCS007-1.jpg
37) JDM S5 roof liner w/o sun roof
$20
http://i19.photobucket.com/albums/b1...314/DCS027.jpg
38) JDM S5 Logicon
$30 Shipped
39) S5 Tails
Great shape
$200 shipped
http://i19.photobucket.com/albums/b1...S/IMG_0126.jpg
40) Rear speaker covers (black)
$30 shipped
http://i19.photobucket.com/albums/b1...akercovers.jpg
41)S5 front bumper - Black, no lights or lenses
$150
WHEELS:
-------
42)FS: WORK VS-SS 18x9J+26 17x9J+35 17x8J+30 5x114.3 w/Tires,lugs,spacers
[img]
http://s19.photobucket.com/albums/b1...heels/P000.jpg[/img]
Up for grabs. My set of WORK VS-SS
[img]
http://s19.photobucket.com/albums/b1...heels/P001.jpg[/img]
++CLICK PICS FOR HIGH RES++
*18x9J +26 Gold(Pair)
225/45ZR18
Fedreal SS959 30% left
*17x9J +35 Silver
215/45R17
Lexani N3000 60% Tread left
*17x8J +30 Silver
215/45R17
Falken Azenis RT615 70% tread left
-Silver wheels are in very good condition, ony very minor blemishes, including small chips from
rocks and clear coat/paint fade/peel, not curbed
-Gold 18's are in used condition, including small curbage, scraps, paint fade and one wheel
having ovaled holes, wheel is sill prefectly usable. One has small dent on the edge on the back
side, again, not affecting performance
-Sticker missing from 17x9
Set of 4-17's $900
Pair of 18's $500
http://s19.photobucket.com/albums/b1...els/PHR002.jpg
http://s19.photobucket.com/albums/b1...els/PHR003.jpg
http://s19.photobucket.com/albums/b1...els/PHR004.jpg
http://s19.photobucket.com/albums/b1...els/PHR005.jpg
http://s19.photobucket.com/albums/b1...els/PHR006.jpg
http://s19.photobucket.com/albums/b1...els/PHR007.jpg
http://s19.photobucket.com/albums/b1...els/PHR008.jpg
http://s19.photobucket.com/albums/b1...els/PHR009.jpg
http://s19.photobucket.com/albums/b1...els/PHR010.jpg
http://s19.photobucket.com/albums/b1...els/PHR011.jpg
http://s19.photobucket.com/albums/b1...els/PHR012.jpg
43)17" Enkei wheels
Needs front rubber
Decent burn off rubber on the rear i think its 215/40/17 or close
FC/S13 fitment, i forget the offsets
17x7.5 17x8.5
$275
5mm spacer in the front
http://i19.photobucket.com/albums/b1...14/FC3S/02.jpg
http://i19.photobucket.com/albums/b1...14/FC3S/01.jpg
http://i19.photobucket.com/albums/b1...14/FC3S/14.jpg
http://i19.photobucket.com/albums/b1...14/FC3S/16.jpg
http://i19.photobucket.com/albums/b1...14/FC3S/12.jpg
Quote
