Another eg! TD16

[Sentry]

Well technically an EH3. Here's my Honda.

It was stock when I bought it last September, so I won't bore you with progress pics. Here's its current state though.

I'll skip the odds and ends and get to the good bits. Stock D16Z6, ACT HDG6 clutch, GReddy 15g kit at 11-12psi, eBay intercooler, eBay SSQV (fins taken out so it doesn't queef, it just whooshes), RC 370cc injectors, Motorola 2.5bar MAP sensor, Phearable ECU and basemap, eBay resonator cat delete, Vibrant Streetpower flat black catback. That's all I'm doing to the engine (or so I keep telling myself).

I'd like to get the thing tuned before winter sets in for good, but I can wait til summer if I have to.

Wheels are 15x6.5" Rota Grids in full royal sport bronze.

Back in May in Yellowknife.

Currently red/black/primer and very, very dirty.

Engine bay... My splash tray never really did its job.


Going in for paint on Monday, gonna be all one colour back to red. I think I'll get the door moldings painted too.

EDIT: CURRENT SETUP LISTED BELOW

[size=5pt]Engine[/size]
D16A6 block, stock bore size, stock sleeves
[size=1pt]~~FJ RSpec forged rods
~~YCP Vitara pistons
~~OEM crankshaft
~~Hastings rings
~~ACL Race bearings
~~King thrust washers
~~ARP rod bolts
~~ARP head studs
~~8.4:1 compression[/size]
D15B VTEC head
[size=1pt]~~COMP 59300 cam
~~COMP springs
~~COMP retainers
~~Skunk2 Tuner Series adjustable cam gear[/size]

[size=5pt]Turbo and Exhaust[/size]
eBay Drag knockoff cast manifold
Garrett GT2860RS .86AR turbo
HKS adjustable wastegate actuator
Big assed black intercooler stuffed behind the bumper
Stainless t-bolt clamps and 3 ply silicone couplers all around
eBay HKS knockoff blowoff valve - shithawk sounding noise fin removed
Turbosmart manual boost controller
3" downpipe, header wrapped and silicone sealed
2.5" Vibrant Streetpower catback

[size=5pt]Fuel and Electronics[/size]
Walbro 255lph intank fuel pump
Denso 720cc (70lb) injectors
BEE-R 2 step rev limiter
HKS turbo timer
Boost and EGT gauges
Socketed Honda ECU running Crome EMS with datalog

[size=5pt]Drivetrain and Suspension[/size]
Competition 6 puck heavy duty clutch
Rotora Axxis Ultimate pads
CM 1.5" drop springs
Integra Type R rear lower control arms
Integra GSR rear sway bar
eBay front and rear strut braces
Diamond Racing Challenger 14x7 wheels
Falken Azenis 195/60R14 tires

[size=5pt]Misc.[/size]
eBay GReddy knockoff catchcan
Monsterknobs shift knob
Integra GSR front seats
Amber front turn signals
Dyno tune

[streethondas]

Looking goood

[SeeAreEx]

Looks good man, be even better once its painted.What are your plans for it, build wise?

[Sentry]

Originally posted by SeeAreEx
Looks good man, be even better once its painted.What are your plans for it, build wise?

The injectors and turbo I have right now are enough to max out the stock bottom end, and I'll probably just leave it like this for a while.

Suspension wise I'd like to get something going next summer. Basic coilover setup. Other than that, drive it.

[Nissan_Fanboy]

nice man, i never knew what you had going on under the hood.
you going to build the engine after a while or just drive her till she blows ?

me and streets are probably going to be building his d16 haha.

[Sentry]

I'm gonna drive it into the ground or until I get bored with it.

[streethondas]

Originally posted by Nissan_Fanboy
me and streets are probably going to be building his d16 haha.

yeah man we doing it up

[89s1]

Nice, turbo d ftw :P

[Sentry]

Originally posted by streethondas


yeah man we doing it up

Keep me posted. You going crazy with it?

[streethondas]

Originally posted by Sentry

Keep me posted. You going crazy with it?

not to sure, but i just want a learn

[Nissan_Fanboy]

Originally posted by streethondas


not to sure, but i just want a learn

You payin for it ? haha
I got no money atm.
Got to save ERRRY penny

[streethondas]

I'm broke right now, still have to pay for my paintjob n pick up the stance coilovers soo next to paychecks are already gone

[Nissan_Fanboy]

Originally posted by streethondas
I'm broke right now, still have to pay for my paintjob n pick up the stance coilovers soo next to paychecks are already gone

SHIEETTTTT may be awhile before we get started haha.
I think ill be flat ass broke for like a year so...

[streethondas]

Originally posted by Nissan_Fanboy



SHIEETTTTT may be awhile before we get started haha.
I think ill be flat ass broke for like a year so...

i dont know why i put in my last post

and yeah learn to power slide corners that might save you some money

[Sentry]

BOOM





My winter tires are meaty. :lol:

[Nissan_Fanboy]

That color looks really nice man!

[Joe-G]

Nicceee! Paint looks good. Single? Or Base/Clear?

I keep forgetting to bring it with me. Ill try to remember tomorrow if you still want it, its just im usually late in the mornings so it slips my mind...

[Sentry]

No problem.

Single stage, 800 bucks with full prep, etc.

No runs, no fisheyes, orange peel is minimal (I've seen worse on brand new vehicles).

Only thing they forgot to mask were the license plate lights in the tailgate, but they still light up pretty decently.

[Joe-G]

Did you do all the body work? Or did you get someone to do it?

PM me the details! lol If you did it all, i should get you to paint my car!

[Sentry]

All I did was some finishing on the rear quarters and then shot them with some primer so that they wouldn't start to surface rust. I had a guy weld those in for me.

You don't want me doing bodywork on your car.