Registered User
ADT home security
Anyone know an installer and can get an installer code. I bought a house that had a deactivated system, but i kinda like having the local bell go off if there was activity in the house when it was armed. I'm now getting this bF error that i cant get rid of. I don't think adt will come and fix this without me signing up for one of their ridiculous plans.
or if you know how to fix this without recommending i disconnect the system, that would be much appreciated.
Registered User
ADT is one of those companies that will never release the installer codes.. they have company policies in place that will prevent any employee to hand over any installer code.
That being said it's usually a standard number attached with the account number associated from the monitoring station.
Your best bet is to ask local alarm companies for an unlocked DSC unit that has been returned to them (scrap)
if you're comfortable with hooking the unit up yourself.
Originally posted by Melinda
You certainly are not a very nice person though.
Registered User
United alarm had no problem getting into my ADT system when I switched over to them
They might be able to fix you up.
ADT wanted a lot to ad a couple of things and fix the problem you have
The installer also did work for Adt
Last edited by autosm; 02-04-2013 at 08:45 PM.
Registered User
My buddy owns an alarm company that typically uses the existing system in place. Try calling John at 403-471-6881 and tell him Des sent you.
Last edited by skandalouz_08; 02-05-2013 at 12:28 PM.
Registered User
Yup that being said... if you have an installer buddy he can always take down the panel and default it.
It erases everything and just uses the standard codes that are available in the installer manual.
OP, do you happen to know what type of system you are using?
Originally posted by Melinda
You certainly are not a very nice person though.
Registered User
after some time spent googling I was able to get into the program mode, where i can change the installer code, now if anyone has a ADT vista 20P model or safewatch 3000, I can help.Originally posted by brandon
Yup that being said... if you have an installer buddy he can always take down the panel and default it.
It erases everything and just uses the standard codes that are available in the installer manual.
OP, do you happen to know what type of system you are using?
Wannabe Banned User
Good for you....what a difference between smart people and people who sit there and wait to be fed.Originally posted by hrdkore
after some time spent googling I was able to get into the program mode, where i can change the installer code, now if anyone has a ADT vista 20P model or safewatch 3000, I can help.
Posting Permissions
Quote