New Deck - Wiring problem, need help...

[Speed_RaSiR]

I previosly had a Sony Xplod deck, on the back it had the input for 4 wires

Front - Left - Right
Back - Left - Right

The new deck only has input for

Back - Left Right

WTF? Do I need a splitter or something? I only have sound coming from teh back...

Any Ideas?

[duukiey]

what is the new deck, that would help alot...???

-mike-

[spike98]

Is a signal going into or out of those wires. If it is in then it is most likely an aux input. If it is out then something is wrong with the wiring harness. EVERY aftermarket Cd player has front L/R and rear L/R.

[Gonthro]

Originally posted by spike98
Is a signal going into or out of those wires. If it is in then it is most likely an aux input. If it is out then something is wrong with the wiring harness. EVERY aftermarket Cd player has front L/R and rear L/R.

no if its not amped.

[Weapon_R]

Sounds like your stereo needs an external amplifier - on the bright side, all of the highest quality stereos require an external amp. Like mentioned above, you need to tell us what kind of deck it is...

[spike98]

Originally posted by Gonthro


no if its not amped.

I was just assuming it was!


I, in fact have a Head Unit that requires external amplifaction.


PLEASE OH PLEASE tell us what make and model it is so i can sleep tonight.

[Speed_RaSiR]

Sony CDX-R3300



Its amped

The other deck had both front and rear left and right, the new one only has rear left and right, wtf?

[dogmaiwli]

It has 4X52W amp built in, But it only has one set of pre-outs.

Not slagging your deck choice, But you should have payed attention and got one with Double or Triple Pre-outs.

Then you would have Front / Rear / Sub. And you would be able to fade Independently.

This deck is basically setup to run your amp off of the Rear Pre-outs so All you fading will have to be set up ahead of time on the amp or the crossover

[Speed_RaSiR]

Originally posted by dogmaiwli
It has 4X52W amp built in, But it only has one set of pre-outs.

Not slagging your deck choice, But you should have payed attention and got one with Double or Triple Pre-outs.

Then you would have Front / Rear / Sub. And you would be able to fade Independently.

This deck is basically setup to run your amp off of the Rear Pre-outs so All you fading will have to be set up ahead of time on the amp or the crossover

ehhhhhhhhhh, I have no idea what you mean. Here is my question. In order to get to to work for the front what do I need to do?

Also If I where to choose to remove my subs and amps would this deck work with my stock system?