put new exhaust on.

[2000impreza]

a few months i got this axle back exhaust from australia... lol. the problem is one tip sits higher than the other. one of the hangers are also way off. the tips sit too close to the bumper. i think it might melt it. i "think" this exhaust was made to fit the older style wrx.... anyways need some opinions.

-does this exhaust look really bad because one tip sits higher than the other?
-what can i do about the tips being too close to the bumper? this exhaust is also hight ajustable. it sits at the lowest setting aready.
-the axle back exhaust piping is 3" in diameter. midpipe is 2.5". is this too much for a 2.5L NA engine???

pics

[Ekliptix]

I think if it was level, it would make a big difference. It looks shiny though. Hopefully you can staighten it out somehow because you don't want to spend a significant amount of money on your car and not be happy w/ it.

Good luck.

[Audi Kid]

doesnt look that bad but if you spent alot of $ try to return it or somethin..

[2000impreza]

it doesn't look too bad. but doesn't look quite right. i don't know if i should put the old exhaust back on. i don't really like the fart can look anymore cause everyone has one...


EDIT: i don't know how to spell

[Audi Kid]

hmmmm id keep the new one! go to a good muffler shop and see what they can do for ya man

[4wheeldrift]

Is that an MRT exhaust? If the exhaust is height adjustable, adjust the lower side to bring it up to the same level as the high side. It looks a little funny, but it isn't so bad either.

I don't really think the exhaust is too big, its just not really doing a hell of a lot for you. The biggest restriction (header and cat) are still intact, so opening everything up behind it doesn't do much for performance (it does a bit, but the gains are negligible).

In terms of the tips being close to the bumper, those do look rather close. If you are very patient, you could radius the opening in the bumper to get it away from the exhuast. Its just plastic, a good sharp knight will do the job to cut it back a little bit.

One question though, it almost looks like the exhaust is on upside down? the big part of the canister is on the bottom, usually its tucked up behind the bumper. Maybe thats how that one is supposed to look, I'm not sure.

[GT2NV]

hmmmm even though everyone has your old style exaust, i say you should keep it, it looks alot better, and more suited to your car, the other one just looks like its stock well its totally up to you, thats just my 2 cents

[HRD2PLZ]

I went with the stock look on the Accord too, I was going to get a so-called "fart-can" but ended up buying a stainless dual tip muffler from Tunerworks instead. I think the dual looks better (on your car and mine). Unless you want your exhaust to look modded...

[boi-alien]

i like it! just get it leveled out!!

[2000impreza]

4wheeldrift. its a bpm exhaust. the muffler can itself is pretty round. the top part sits high so you can't really see the top of the can. hehe. haven't given much thought about the mrt. not much people have bpm exhaust on the older style impreza's so i didn't expect it to fit perfect. hey, who knows.

i went with dual tip because i wanted less "in your face" look cause i was tired of everyone reving their engines at me. sometimes i just want to drive...

i think i can get the tips leveled out by rotating the midpipe flange. who knows. i might just leave it. haha. if you guys see a silver impreza with a uneven exhaust tips thats me.

[Fluidic]

Just get everything straightened out.... and it will look fine.

Are you in Calgary yet/now?!

Peter

[2000impreza]

Originally posted by Fluidic Digital
Just get everything straightened out.... and it will look fine.

Are you in Calgary yet/now?!

Peter

yep, been in calgary for awhile now. been out a few times. so fun here. went shanks(spelling?) tonight. hehe. fun fun.

[2000impreza]

i undid the midpipe to cat flange and rotated the whole midpipe and exhaust. i got it to straighten out a little bit.............. hehe. it looks pretty good now.

[LowRiderHD2000]

Looks much better.

Hows it sound?

[Fuji]

I have 2 1/4" piping... I read in a lot of magazines (for imprezas) that's the size to use for optimal flow/backpressure. Anymore than that can lead to power loss

[Eagle Eye]

I like the dual exhaust tip aswell. Looks a lot cleaner than the one you can put your head into (Tin can exhaust). Looks a lot better now than it did in the first few pics! Good job

[tulit]

Roland, the hangers on the exhaust allow you to adjust the height on either side (theyre bent slightly for that).


You can adjust either side by just rotating how far you screw the hanger into the exhaust. Certain distances of screwing it in will make the hangers bend at different locations relative to the muffler. Then use the bolts on the hanger threads to lock everything in place.


That will probably fix your height issue, as well as it sitting crooked. Just set both hangers so that they are bent upwards as much as possible.....

[2000impreza]

i have most of the problems figured out. hehe. thanks for all the comments.

sound wise........ its very deep. up to 3000rpm its pretty quiet. after that it gets very loud. way deeper than my previous exhaust. then again the boxer engines are very deep sounding. hehe. i'll post up a sound clip when i get a chance to.

[GT2NV]

Originally posted by Fuji
I have 2 1/4" piping... I read in a lot of magazines (for imprezas) that's the size to use for optimal flow/backpressure. Anymore than that can lead to power loss

hmmmmm i have 2.5.... and it improved high end power alot 2 1/4''??? dont cars come stock with that? at least mine did

[4wheeldrift]

Originally posted by black94gt

hmmmmm i have 2.5.... and it improved high end power alot 2 1/4''??? dont cars come stock with that? at least mine did

Every car is different