Well got my registration submitted for the 2020 GBC which filled all 75 spots in less than 24 hours!
Just a little bit popular right now!
I have been trying to sort the fuel issue I am running into; it wont hold an idle. I did manage to get it running at half throttle and above but it dies like it is running out of fuel.
Fuel pump checks out and I am running from a jerry can for test and tune purposes so it's not a bad tank or lines.
Put a vacuum gauge on it and it rapidly fluctuates from 12" to 18" of vacuum so I assume valve clearances are out.
Pulled the valve cover again (I already ran the valves) and found that the intake valve on cylinder 4 is bent again.
Found out that the intake valve is stuck shut. Dammit-that means pulling the head. Hope it is gummed up from old fuel and sitting for so long and isn't bent.