Quick question,
A coolant flush done wrong...could this result to engine overheating and then on top of that the oil overheating.
I dont have a radiator cap but only the resavoir cap. drained all the fluid, flushed it out, put the heat on high and ran the car as i filled it up with coolant. (as per a DIY i read)
Problem was, the resavoir would bubble up and start spewing coolant out of the tank it would get so high. Then when the engine cools down after being turned off the tank is empty.
Either way, I now have a car that had the coolant temp that passed the mid mark. Not by much but i kept a eye on it and then the engine oil started getting just past half.
On a side note, my engine oil temp guage has always read at about 1/4. Is this normal or should it be at the half way mark?
Thanks in advance.