With the billet caps, do you have to have the block line bored? Or are they pretty much plug and play?This quote is hidden because you are ignoring this member. Show Quote
With the billet caps, do you have to have the block line bored? Or are they pretty much plug and play?This quote is hidden because you are ignoring this member. Show Quote
Their customer service said align hone only, but that would be a first for all the main cap replacements I've had experience with. I can't see them getting it that close to production blocks with variances.
Did some more shopping, Dana 60 front and Dana 70 rear for my ramcharger.
Too loud for Aspen
Would be nice to get away with just a hone but I agree that sounds a tad optimistic. Could get lucky though, tolerances on a modern block are a lot better than the 60s lumps.
Boss axles, kingpin HPD60 fronts are getting harder to find. Those come out of a SRW Ford?
The front is a 93 dodge dually front, I have to find Srw hubs for it, the rear is 92 dodge Dana 70 srw axle. I also got a 46rh I am going to mill the small block bellhousing off and make a one off big block 46rh. I am re-gearing the diffs to 4.56's. The motor if it passes crack checking is going to be a 400 b engine stroker with the trick flow max wedge heads, should be good for 600-700 flywheel horsepower.This quote is hidden because you are ignoring this member. Show Quote
Too loud for Aspen
Damn man, you are going to have a fleet of seriously kickass Mopars by the time you're all done. Are you planning to use a JW Ultrabell for the 46RH(A518) conversion?
Brand spanking new Sumitomo's for the C30.
Originally posted by speedog
So more beyond armchair activism at work again?
I was looking at the ultra bell, it bolts to the pump housing, so I thought I would strip the case down first and see how deep those pump bolts are to see if there is enough strength to fasten to. I was thinking I could deepen the holes and heli-coil the lot to make it stronger. I could also weld a BB 727 bell to the 46h case, but a jig would be needed to keep it all straight during welding.This quote is hidden because you are ignoring this member. Show Quote
Too loud for Aspen
Been 20 years since I had a tank. 90G
$150 new at Canadian Tire, $75 on Kijiji, just a bit of dust on it...
Will fuck off, again.
"if you disagree with my views are cannot adequately my criticism then ignore my posts." - Nusc
Couldn’t help myself on a good deal. New truck/camping gun.
Originally posted by Thales of Miletus
If you think I have been trying to present myself as intellectually superior, then you truly are a dimwit.
Originally posted by Toma
fact.This quote is hidden because you are ignoring this member. Show Quote
Bears. Duh.
Originally posted by Thales of Miletus
If you think I have been trying to present myself as intellectually superior, then you truly are a dimwit.
Originally posted by Toma
fact.This quote is hidden because you are ignoring this member. Show Quote
Ordered an RSNAV last week:
Android based head unit that gives you a 10.25" screen, cellular (not sure if i'll use this quite yet), reverse camera (my 2013 doesn't have one), and wireless carplay and android auto among other things. All the reviews are really good, and preserves the factory look & feel including steering wheel controls and factory menu/settings.
Nice little upgrade to modernize my 2013 Q5 tech and hopefully prevent me from wanting to upgrade cars any time soon
Last edited by sabad66; 09-16-2019 at 12:05 PM.
It's only September and I'm already spending xmas money. Bah-humbug.
New "custom" closet for myself and my Fiance, finally get my walkin closet finished. Not the exact closet we ordered as we have TWO sides for the walk in. Custom PAX from Ikea
But it says door-breacher, not bear-breacher. Unless the bears are in the next camper over and you want to get into their RV to steal their hi-chews. That's not cool.This quote is hidden because you are ignoring this member. Show Quote
Looks like we got ourselves a Reader!This quote is hidden because you are ignoring this member. Show Quote